Best Miter Saw Blade

Best Miter Saw Blade in 2021 – Reviews & Buyer’s Guide

Miter saws are an essential tool for everyone’s carpentry needs, whether it be professional or just a hobby. However, a lot goes into making your miter saw the best it can be.That’s why we’ve taken it upon ourselves to help go through all the choices and find the best miter saw blade for you! 5, to be exact.

Best Miter Saw Blades Comparison Chart

Blade Picture

Product

Blade Diameter (Inch)

Rating

Price

Freud D12100X 100 Miter Saw Blade

12 inch

4.7/5

DEWALT Parent Title

12 inch

4.4/5

Makita A-93681 10-Inch 80 Tooth Micro Polished Miter Saw Blade

10 inch

4.2/5

Hitachi 725206 72-Teeth Tungsten Carbide Tipped 10-Inch ATB 5/8-Inch Arbor Finish Miter Saw Blade

10 inch

4.1/5

TOMAX 12-Inch 80 Tooth ATB Fine Finish Saw Blade with 1-Inch Arbor

12 inch

4.1/5

5 Best Miter Saw Blades Reviews

Freud Circular Saw Blade, Best 12 inch Miter Saw Blade

The 12 inch Freud circular saw blade is designed to provide you cuts on desired pieces of wood effortlessly! The blade comes with great perks such as a kerf made with laser cuts and stabilizer vents which are also laser cut. When the motor runs at its extreme speeds, the blade will sometimes require adjustments to withstand the workload, and that’s what you get with the laser cut kerf. As for the laser cut stabilizer vents, they trap any noise and vibrations within the mechanism, making the blade more stable and ultimately more precise in its cuts. What more could you want? 

Well, we’ll tell you that you’re bound to get more. The Freud circular saw blade is also made of carbide which is high density and allows the blade to have a longer life span, while remaining sharp. This is also helped by the blade being able to withstand extreme impact pressure due to the carbide tips and tri metal shock resistant brazing. 

Now that we’ve laid out the details of this stunning blade, you know why the Freud circular saw blade is our top choice. This blade carries with it a lot of perks, making it our top rated choice for the best 12 inch miter saw blade. You’ll be sure to get top notch cuts on your wood and wood composites with this blade.

Pros
  • Extremely precise and accurate
  • Increases lifespan of your miter saw
  • Minimal maintenance required
Cons
  • Slightly expensive

Dewalt Circular Saw Blade, 12 inch Miter Saw Blade

A special treat from Dewalt with this one, as they’ve packed in two blades in the same packet, without an increase in price. Not to mention that these aren’t just two of the same blades, one has 80 teeth and the other has 32 teeth, allowing you a lot of versatility. However, the increased versatility doesn’t stop there with the Dewalt circular saw blades as they are usable for cutting hardwood, softwood, chipboard and plywood! 

What else is special about these Dewalt Circular saw blades though? Well for starters, these blades are one of the best for making crosscuts with their tungsten carbide builds. While that is enough to build your trust in their accurate and clean cuts, they also have an exclusive wedge shoulder design, placing more steel behind each tip of the blade; making them even more accurate, along with increasing durability. 

We could go on and on about its accuracy, which is why it’s the best for crosscuts. And, we will go on about it! Jokes aside, the Dewalt circular saw blades have a computer balanced plate which increases accuracy and provides a better finish, but also minimizes vibrations when cutting. You’re sure to make very accurate and precise cuts with this pack of 2 blades, and you’ll also end up getting more for your share of money spent!

Pros
  • Very affordable
  • Get 2 for the price of one, along with a case
  • Can cut many types of materials
Cons
  • Can cause splintering
  • Blades are very noisy

Makita Circular Saw Blade, Best 10 inch Miter Saw Blade

Next on our list charting at number 3 is the Makita miter saw blade. You can trust us that in terms of its usefulness, it’s one of the best. That’s the reason the Makita circular saw blade is up here. You can use this blade to cut up hardwood, softwood and plywood!

Now, Makita has had a strong history for providing beautifully finished functional blades. And on that note, this Makita Circular saw blade lives up to the name. It can provide you extremely straight cuts, and will allow you to make fine and precise crosscuts. Not to mention it’s micro-grain carbide finish, allowing you to make mirrored finishes. With its beautiful finishes and functionality, the Makita circular saw blade truly is the best 10 inch miter saw blade for you!

However, it does let you down in one aspect; its durability. Even though the Makita circular saw blade is a beautiful miter saw blade, it does lack longevity. However, it still rivals almost any other blade out there. If you’re managing small jobs and require the best cuts, this blade will definitely do the job for you, and you can be assured that you’ll receive what you want!

Pros
  • Precise and accurate
  • Has a great value price
  • Low noise creation
Cons
  • Lacks in durability

Hitachi Circular Saw Blade, 10 inch Miter Saw Blade

Our next blade is an edition from Hitachi. Almost everyone is familiar with Hitachi, since they’re a well known and reliable brand. This only favors you when buying the Hitachi circular saw  blade though, since you get a 30 day limited warranty on it! Not bad right?

Besides that, how does this blade vary from our recommended best 10 inch miter saw blade made by Makita? Well, the aesthetics weren’t of primary value when making this blade, rather it’s performance and durability was. The Hitachi circular saw blade is made with tungsten carbide, up until its tips, and it is brazed with 3 different types of metals. No wonder it’s so durable right? On top of that, it will allow you to make some of the best cuts for crown molding, and make it easier for your miter saws! 

Now, if this blade is so good, why is it behind the Makita? While this may last you for ages, we consider the finishes provided by your blades to be of utmost importance. In that case, the Hitachi circular saw blade can sometimes let you and your miter saw down, because of the roughness of some cuts. This however, is in contrast to the Freud miter saw blade we saw beforehand.

Pros
  • Very durable
  • Precise and accurate
  • Good value
Cons
  • Can make cuts a little rough

Tomax Circular Miter Saw Blade, 12 inch Miter Saw Blade

Let’s round these choices off with another 12 inch blade shall we? This time, it’s from Tomax. The Tomax circular saw blade will end up treating you very nicely due to the limited warranty it has. 

Regardless of the warranty, what makes this blade worthwhile? Well, the Tomax circular saw blade has an electrophoretic coating on it, which provides the blade a long life span because of reduced corrosion and rust. Not to mention, this blade comes with construction grade carbide teeth. This means that Tomax circular saw blades will not only remain strong for a long period of time, but also provide you clean cuts.

You’ll get clean cuts, but what can it cut? The Tomax circular saw blade can be used on your miter saw to cut any and all types of wood. However, the downside is that it can only be used for cutting wood. It was also noticed that upon use, it was only proficient at cutting soft wood. However, while that was a rare occurrence that does cause the blade to shift down in ratings.

Pros
  • Can cut all types of wood
  • Is very long lasting
  • Has a warranty in place
Cons
  • Leaves rough cuts

How to Choose the Right Blade?

Blades are very diverse and based on your needs, you can find a whole range of them in the market. However, it is key that you have information on the right things when it comes to choosing your blade for your miter saw. What are these features?

  • Price

    This is an obvious feature to keep in mind no matter what you’re shopping for. However, with blades prices can shift from cheap to very expensive. It mostly depends on whether or not you want to splash your cash for the extra perks that come with the expensive blades. It is important to remember that these perks can increase the efficiency in your work and provide you with better results than you have had previously.

  • Diameter

    The diameter is mostly a choice for you. However, it becomes necessary for you to obtain a specific diameter for your blade if you already have a miter saw. In that case, you’ll need to know what size your miter saw can take, and select one from that range. It goes without saying that a wrong size will not only affect your results but also harm your miter saw.

  • Gullet

    The gullet is the space in front of each tooth on your blade. This area is present to help accumulate the sawdust when you’re making cuts. For these instances, it is advised you have different blades for crosscutting and rip cutting unless your blade can handle both. For example, when you make a crosscut; you’ll be better off using blades with a smaller gullet. This is because wood chips that are created are very small and not to mention, there’s a lot fewer wood chips created than when you’re using a rip cutting blade. For a rip cutting blade, you’ll have a larger gullet to anticipate a larger amount of bigger wood chips, compared to crosscutting.

  • Teeth

    Put simply, a blade with more teeth will produce finer cuts and have smaller gullets, because of less debris. This means that blades with fewer teeth will produce rough cuts, and thus require larger gullets. If you’re looking to make clean and nice cuts for a refined job, then you’re looking for blades with more teeth for your saw. However, if you don’t care, you can get a blade with fewer teeth and tear through your materials.

  • Hook Angle

    The hook angle of a blade determines how it will cut materials. Hook angle is basically the angle at which the teeth of your blade are placed in. It can be both negative and positive. The higher (more positive) the hook angle is, the more aggressive your cuts will be. Thus, you’ll end up with more rough cuts. However when it comes to a miter saw, you’ll want blades with a negative hook angle, because it’ll produce a nicer cut.

Still on the fence on how to choose a blade for your miter saw? Watch this for an in-depth look at the technical side.

Can you make Crosscuts with Rip Cut Blades?

Crosscuts and rip cuts are made differently along the grain of the wood you’re trying to cut. For this reason, it’s advised you use the dedicated blades for their dedicated cuts. However, it is possible to make a crosscut with a rip cut blade, and vice versa. 

If you’re trying to find a better alternative though, make sure to get a combination blade for your miter saw. This blade can make both crosscuts and rip cuts. This saves you from having to go through the labor of changing your miter saw’s blades every time. And if you’re not caught up on it, you can learn to change your miter saw blade very easily!

What Materials will you be Cutting?

When it comes to choosing blades for your miter saw, this is one of the most important factors that comes into play. As you’ll have seen from our discussion on the 5 different blades above, each of them have different materials that they can cut seamlessly. However, what if you’re trying to cut metal with a woodcutting blade? Well, then you’ve just ruined your blade and potentially your miter saw too! One of the most important things to keep in mind is to know what materials you’ll be working with (one or multiple) and purchase your blades in accordance to that.

The Takeaway

We hope this article has summarised the concept of choosing your miter saw blades! Overall, our clear winner would have to be the Freud D12100X 100 miter saw blade, because of all the perks that come along with it. Now we know that the Dewalt one we discussed offers 2 blades at once. However, the Freud can deliver that durability and versatility with just that one blade. Not to mention, the Freud miter saw blade can also work efficiently till the point where it conserves the power of your miter saw, which increases its life span as well, while providing you the best smooth cuts! The great functionality alongside all the perks it provides really does place it above all else. We hope you can come to your favorite choice from all the options and information provided!

Leave a Comment