Best Chainsaw Chaps 2021 – The Top Rated Safety Pants

Even if you haven’t watched the movie The Texas Chainsaw Massacre, it’s pretty easy to realize that a chainsaw is just that dangerous to use. After all, you’ve got dozens of small blades rotating fast at a rate of several thousand times a minute. What if you accidentally drop that chainsaw you’re holding on your legs? It’s that distinct possibility that requires you to wear chaps over your jeans when you’re using a chainsaw.

These things also protect you from thorns and other outdoor hazards, in case you’re working in the bush. Also, they protect you from flying debris from the fast-spinning chainsaw.

Unfortunately, not all chainsaw chaps are created equal. The best chainsaw chaps must offer adequate protection, while still permitting you to move around comfortably. To make sure that they actually can protect you, you should check that the chainsaw chaps comply with industry safety standards.

It would also be great if they look nice—no one wants to look goofy while working with a chainsaw. Of course, they also should come with a reasonable price tag.

With all those factors in mind, we’ve compiled a list of the best chainsaw chaps that are absolutely worth your money. Pick any of the chainsaw chaps on our list, if you work with a handheld chainsaw even infrequently.

Best Chainsaw Chaps Comparison Table

Product Picture

Chainsaw Chaps

Standards Compliance

Available Sizes

Price

Husqvarna 587160704

UL certified, ASTM f1897, ANSI z133.1, and OSHA regulation 1910-266

36 to 42 inches (length)

Stihl chainsaw chaps

OSHA Regulation 1910.266

30 to 42 inches (waist)

Forester Chainsaw Apron Chaps with Pocket

ASTM F1897, OSHA 1910.266, UL Certified

28"-44" (waistline)


Husqvarna Technical Apron Wrap Chap

ASTM F1897, ANSI Z133.1 and OSHA Regulation 1910-266

36 to 42 inches (length)

Oregon Protective Chainsaw Chaps

UL Certified, ASTM F1414 Test Method and ASTM Specification F1897

Up to 46 inches (waistline)

LABONVILLE Premium Chainsaw Chaps

OSHA Regulation 1910-266, ASTM F1897-14, ANSI Z133.1

Up to 48 inches waist

Arborwear Men’s Apron Style Chainsaw Chaps

CAN/BNQ 1923-450-M91 3XF3, ASTM F1897-2014 3XF3

Up to 48 inches waist

Portwest Workwear Men’s Chainsaw Trousers

CE-certified

Small to XXL

Pfanner Gladiator Extreme Chainsaw Protection Pants

CE-certified

33 to 41 inches waist

WoodlandPro Chainsaw Safety Chaps

ASTM F1414-13, BNQ/CUL Certified for Class B Standards 1923-450-M91, ASTM F1897-2008, OSHA Regulation 1910-266, ANSI Z133.1 2012

28 to 44 inches waist

Top 10 Best Chainsaw Chaps Reviews

Husqvarna 587160704 Technical Apron Wrap Chap, 36 to 38-Inch

We went with the smaller version, though there’s a longer version to goes up to 42 inches in length. We also chose the orange/gray color combo, thinking that we wanted to be highly visible in a workplace where people are using chainsaws. The waist is adjustable, and it features acetyl Delran buckles.

These protective chaps use 1000-denier polyester, topped with PVC coating and Tek warp protective layers. It protects you from cuts, because it’s meant to pull apart rather quickly when it comes into contact with a spinning chainsaw. The material quickly clogs up the chainsaw sprocket system to stop (or at least slow down) the spinning of the chainsaw.

It’s been known to work, with users in accidents testifying that the chainsaw didn’t even leave a bruise on them. These chaps meet the standard safety regulations ASTM f1897, ANSI z133.1, and OSHA regulation 1910-266.

They’re rather useful even when everything’s working fine, as they have convenient pockets for your various tools. You can even wash them with cold water.

Pros
  • Meets ANSI and OSHA regulations
  • Uses 1,000-denier polyester with Tek warp layers and PVC coating
  • The material is meant to pull apart and stop the chainsaw from spinning
  • Comes with handy pockets
  • Reflective leg bands
Cons
  • Warm to wear on summer days
  • Confusing sizing description

Stihl Chain Saw Protective Chaps

Here everything is orange, though there’s a navy-blue color option. You can also get lengths of 32, 36, or 40 inches.

Of course, it’s more important to note that it’s UL-certified as a chainsaw cut-resistant leg protection when using gas-powered chainsaws. It meets the ASTM F1414 Test Method and ASTM F1897 performance standard.

This is a set of apron-style chaps, which is quite comfy to wear while it’s still rugged enough for outdoor chainsaw use. It uses a cut-retardant material with 9 layers of Avertic Pro by Engtex sewn-in, along with a nylon covering that’s resistant to water and oil.

It’s easy enough to put this on, and it’s adjustable to suit a range of sizes. The waist can set comfortably on sizes ranging from 30 to 42 inches. You can even get a waist extender separately if your waistline is still bigger. Once you’ve got this on, the chap protects down to below your calf.

This comes with an open back, so it’s not quite as warm as you may have feared.  The waistband is also reflective, just to make sure that everyone can see where you are. You’ve also got a huge pocket where you can put your other tools or even your smartphone.

Pros
  • 9-ply protection
  • Materials are designed to stop the chainsaw from spinning
  • Meets safety standards
  • Easy to put on
  • Open-back design
  • Resistant to oil and water
Cons
  • There may be some sizing confusion

Forester Chainsaw Apron Chaps with Pocket, Orange 37 Length with Adjustable Belt

This is available in 3 sizes. Get the short if your height is between 5 feet to 5 feet, 4 inches. If you’re 5’4″ to 6′, go with the regular. If you’re 6′ to 6’4″, the long version is your best option.

These come in 9 different color combinations, and we really recommend that you pick the more visible options like the safety green. For some reason, there are even camo options that let you blend in among the trees. Maybe you’d want to use these things for protection in air gun mock battles, but you don’t want to be invisible with chainsaws in operation.

Despite some of the more bewildering color options, these things do work when it comes to protection. These chaps are UL-certified, meeting both ASTM and OSHA standards. They’re in the apron style, meaning they’re meant to protect the front of your legs.

The protection you get is extremely tough, starting with the 1.200-denier oxford shell. Then you have 12 layers of Kevlar fiber protection. The Kevlar fiber gets into the chain to stop it from spinning. It’s even resistant to water and oil, plus it features a large 6×6-inch pocket for various tools.

Lots of people have reported that these chaps have saved them. Just make sure that when it does get into contact with the chainsaw to protect you, you ought to replace them afterwards.

Pros
  • Lots of color options
  • Complies with industry safety standards
  • Extremely tough with lots of Kevlar layers
  • Comes with a pocket
  • Very affordable
Cons
  • Some of the colors aren’t good for visibility (like the camo)
  • They may hang a bit too loosely

Husqvarna Technical Apron Wrap Chap, 40 to 42-Inch

We got the biggest one this time, since it’s not surprising that a lot of chainsaw users tend to be bigger as well. The waistline does extend up to 42 inches, which is a good thing for most of us.

The fit is good, and there’s also a convenient pocket her you can use on your left side for various tools and accessories. This protects the front of your legs all the way down to the top of your shoes, and it also protects the back of the legs down from the knees. You’ve got 3 straps there to make sure they stay in place.

The protective shielding is quite good, even if you don’t really want to test it firsthand. You’ve got 1,000-denier polyester with the Tek Warp layers, along with the PVC coating. The pad will get itself pulled apart upon contact with the chainsaw, thereby stopping its spinning. It also gives you enough of a reaction time to get the chainsaw off your legs.

Maintenance isn’t really much of a problem, as you can use cold water to wash it. The main problem is once again the sizing, which can be rather confusing. It’s also a bit warm to wear during the summer, but then again that’s a common problem with these chaps.

Pros
  • Meets ANSI and OSHA regulations
  • Uses 1,000-denier polyester with Tek warp layers and PVC coating
  • The material is meant to pull apart and stop the chainsaw from spinning
  • Comes with handy pockets
  • Reflective leg bands
Cons
  • Warm to wear on summer days
  • Confusing sizing description

Oregon Protective Chainsaw Chaps, Adjustable Up to 46"

This is great for a lot of users, since we all have to admit that our waistlines are expanding. So, it’s nice that this one can still fit comfortably even when we have a bit of a tummy.

This is one of the more comfortable options when it comes to chainsaw chaps, and it’s your best option if you find the other chaps toot unbearable to wear. The waist and the length are all adjustable, and it leaves the back of your legs uncovered. The protective layers are also breathable, so they don’t feel as warm as the other chaps.

This uses a 600-denier oxford shell for protection, which may not seem as formidable as the 1,000-denier protection from other chaps. But then you also get 8 layers of the breathable warp knit fabric. These fabrics will bind with the chain up contact, so that the chainsaw stops spinning.

This still gets the UL-certification, and classified as a proper cut-resistant chainsaw leg protection for gas-powered chainsaws. It complies with the ASTM (American Society of Testing & Materials) F1414 Test Method and the ASTM Specification F1897.

Maintenance is also easy, and you don’t even need to wash this by hand. It’s machine-washable.

Pros
  • Nice and breathable
  • Adjustable waist and length
  • Not that heavy
  • Interlocking leg buckles keep it in place
  • Stops chainsaw from spinning
Cons
  • Lower denier level
  • Only available in black, which isn’t really highly visible

LABONVILLE Premium Chainsaw Chaps - Overall Length 32" - Made in USA – Orange

Yes, there’s also a 36-inch version and a 40-inch version too. We tried the smallest one, to see if maybe its smaller size means it offers less protection. Thankfully, that’s not true.

You still get the 5 layers of a special blend that combines polyester and Kevlar. You still get the tough 1,000-denier nylon cordura, which even has a coating of extra-HD urethane. This cordura material even passes the CS-191-53 flame resistance standard.

This works the usual way—the fabric gets caught in the chain and stops it from spinning and mangling your legs. It meets various industry standards, including the OSHA Regulation 1910-266, ASTM F1897-14, and ANSI Z133.1 Standards.

This is very comfy to wear, and it’s even reversible. The small size is great, even for small ladies who use chainsaws.

Maintenance can be a bother, though. You need to wash this by hand, and you can’t use any detergent with chlorine bleach.

You have to keep this oil-free, and to do that you need non-chlorine bleach solvent. After that, you’ll have to use detergent and water, then sue a bristle brush. You finish the cleaning by rinsing with warm water, then you hang it up to dry.

You need to do all this, because you don’t want to ruin the chaps. These are rather expensive, so you may as well take care of it properly.

Pros
  • Comfortable to wear
  • Can accommodate larger waistlines even for short lengths
  • Still offers proper protection
  • It’s even flame-retardant
Cons
  • A bit expensive
  • A bit fussy with its maintenance needs

Arborwear Men’s Apron Style Chainsaw Chaps

This works very well, and it comes with a long list of certifications to make sure you know it. You have 6 layers of blocking material, with heavy-duty nylon on the outside. This even comes with PU coating and durable water repellant (DWR) so that your trousers don’t get wet.

The apron-style design here offers 180-degree protection for the whole front side of your legs. In fact, the wraparound pads even face somewhat to the left, to account for the natural direction of the chainsaw. The heavy-duty buckles here are also designed to deal with the cold and stress.

Don’t worry if you have a larger waistline (don’t we all?), since the waist belt can fit up to 48 inches of waistline. The waist belt can stretch, and it’s adjustable. In fact, this features a special strap system that gives you a customized fit. The straps and buckles can even be replaced if they wear down.

All in all, this offers a very comfortable fit along with protection you can trust. It’s also meant to last for a long while. They’re even machine-washable. Perhaps the only annoying thing here (at least at first) is that it takes time to undo all these straps when you take off the chaps, and it also takes time to adjust them when you wear the chaps.

Pros
  • Conforms to industry safety standards
  • Extremely comfortable due to customized fit
  • Can accommodate larger waistlines
  • Machine-washable
  • Replaceable straps
Cons
  • Straps take time to adjust

Portwest Workwear Men’s Chainsaw Trousers

These aren’t really the chaps you wear over your trousers. Instead, these are actually trousers, so you don’t need to wear jeans underneath.

This does mean your legs are protected 360-degrees, and it’s also CE-certified. It even comes with UPF 50+ protection, meaning it only allows 1/50 of the UV radiation to pass through.

It also offers an elastic waist, plus you get 5 pockets. One of these pockets is even designed for your smartphone. With the black color and orange highlights, you’re highly visible as well.

Pros
  • Offers terrific protection
  • Minimizes UV rays
  • 5 pockets
  • Elastic waist
Cons
  • Feels really warm, especially for summer use
  • Feels heavy too

Pfanner Gladiator Extreme Chainsaw Protection Pants

Now this thing is one of the most expensive options on this list. For one thing, this gives you a pair of pants instead of chaps. It uses a combination of protective materials to protect your legs from the chainsaw. This really acts like a shield, and it won’t tear. The outer fabric repels water, oil, and even heat (or the cold). You’re also protected from thorns.

It’s actually quite comfy to wear, despite the fact that you get 360-degree coverage. The back of the legs has zippered vents, for extra cooling. The special fabric keeps out the extreme heat (and extreme cold). The special stretch technology also gives you a more comfortable fit.

Pros
  • Protects from chainsaws
  • Also resistant to oil, water, and thorns
  • Won’t tear
  • Vents at the back
  • Stretches for a better fit
Cons
  • Extremely expensive
  • May be a bit warm for summer use

WoodlandPro Chainsaw Safety Chaps

Let’s first start off with the safety certifications, since there are a lot of them:

  •   UL Certified in Accordance with ASTM F1414-13
  •   BNQ/CUL Certified for Class B Standards 1923-450-M91
  •   ASTM F1897-2008 Leg Protection for Chain Saw Users
  •   OSHA Regulation 1910-266 for Logging Operations
  •   ANSI Z133.1 2012 Standards for Tree Care Operations

We begin with these assurances because this doesn’t really look impressive at first. The protective pad measures anywhere from 28 to 36 inches long, depending on the size you get. You basically wear this like a belt, as it fits waist sizes from 28 to 44 inches. Then you have 1-inch adjustable leg straps with quick fasteners.

These chaps are effective, thanks to the super-tough 1,000-denier ultra-nylon blaze-orange covering. It’s reinforced with 2 layers of Kevlar, and then another 2 layers of polyester felt for the pad.

This has been around since the 1980s, and it has protected quite a few people from horrendous injuries when they’ve accidentally dropped their chainsaws on their thighs. Wear them, and you also protect your jeans from various nicks and splattered oils from the chainsaw.

These are very affordable as well, and they’re also easy enough to put on and take off. Maybe they’re a bit warn for summer use, but you can live with that easily. At least you know you’re getting proper protection for yourself in case the worst happens.

Pros
  • Affordable
  • Easy to put on and take off
  • Meets lots of safety regulations
  • Comfy to wear and move around in
Cons
  • Maybe a bit warm during the summer

Why Doesn’t a Chainsaw Chap Work Against Electric Chainsaws?

You may have noticed that for many of these chainsaw chaps, there’s a warning that they don’t work as well with electric chainsaws. They only work against gas-powered chainsaws.

The main reason for this is due to the power consistency difference between these 2 types. With a gas-powered chainsaw, the chain power pulses. That is, there’s an intake stroke and then a power stroke, alternating while it cuts.

These chaps are designed to be pulled apart, so that they gummy up the works of the gas-powered chainsaw during the intake stroke. That stops the spinning of the chainsaw.

However, with the electric chainsaw the power is consistent. The torque remains high, even when it comes into contact with your chaps. So, it will destroy your protective shield, and then keep on running to mangle your leg if you’re unable to get the chainsaw off.

Conclusion

With the best chainsaw chaps, you have to balance the need for protection with your desire to be comfortable. A lot of people don’t wear them because they can be ill-fitting, too heavy, or just too warm. But these are small problems, compared to the serious injuries you’d get from a chainsaw accident while you’re not wearing these chaps and trousers.

So, do yourself a favor and wear the best chainsaw chaps you can get. Pick one from our list, and you’ll satisfy your need for protection and your need for comfort as well.

Leave a Comment