Best 2 Stroke Oil for Chainsaw Reviews (2021)

A chainsaw needs proper maintenance for peak performance. Without high-quality 2 stroke oil, you may see a decrease in power and a shorter lifespan. Here, we’re going to go over our favorite choices for the best 2 stroke oil for chainsaw available on the market today.

Our Favorite 2 Stroke Oil for Chainsaw

Here, we’re going to go over our top picks for the best 2 stroke oil for chainsaw.

Echo Power Blend Xtended 2-Stroke Oil Mix

This versatile, universal oil works well in just about any air-cooled two-stroke engine, including those found in most chainsaws. It mixes well at a ratio of 50:1 as required by most modern chainsaw manufacturers.

While this oil is slightly pricier than other semi-synthetic options, a little bit goes a long way. With a single 6.4 ounce bottle, you can mix up to 2.5 gallons of gasoline for your chainsaw.

If you don’t plan on using your fuel mix all at once, this two-stroke oil contains stabilizers that give it longer shelf life. You don’t have to worry about losing time, money, or equipment to an expired mix. Echo stabilizers as much as double fuel life.

During operation, this oil offers enhanced cleaning capabilities to make regular maintenance a little bit easier. It contains additives that keep the exhaust port free for superior performance and a longer lifespan.

Echo Power Blend protects against rust and corrosion as well as regular wear, with minimal deposits and carbon buildup. It also produces low smoke emissions, making this oil an eco-friendly choice. 

This two-stroke oil from Echo exceeds ISO-L-EGD standards as well as JASO M345/FD requirements. It provides a safe, clean, and effective burn with minimal pollution.

Pros
  • A universal formula works for just about any two-stroke engine, from chainsaws to lawnmowers
  • Includes stabilizing additives to as much as double fuel life during storage
  • Mix up to 2.5 gallons of gasoline with a single 6.4-ounce container
  • Ideal for the 50:1 mixing ratio recommended by most chainsaw manufacturers
  • Exceeds ISO-L-EGD and JASO M345/FD requirements for safety and efficacy
  • Protects against rust, corrosion, wear, and carbon buildup
  • Clean burn produces minimal smoke and ash
Cons
  • The packaging does not include a measuring cup, making mixing more difficult
  • No clear strip on packaging to view remaining oil levels
  • Pricier than other similar two-stroke semi-synthetic oil options

Lucas Oil Semi-Synthetic 2-Cycle Oil

This semi-synthetic two-cycle oil comes in a variety of sizes, from a small 6.4-ounce container to a full gallon. It meets ISO GD as well as JASO FC and FD standards, making it a high-quality option that won’t gum up your engine.

Lucas’ two-stroke oil is ideal for the air-cooled engines found in most chainsaws. It works well in gasoline and oil premixes with a ratio of 50:1. However, it may not work as well with small or older chainsaw motors that require a 32:1 ratio, as it tends to dry out.

You can mix this oil at just about any temperature, making it a good choice no matter the time of year. It works well even at the high heat produced by most chainsaw engines.

This oil boasts a clean, smokeless burn and lower ash production than many of its competitors. It’s an eco-friendly option for those concerned with their carbon footprint.

Because it’s clean-burning, Lucas two-cycle oil doesn’t leave residue buildup inside your chainsaw engine. The semi-synthetic formula includes additives that prevent carbon deposits from building up on pistons, crowns, skirts, and more. This not only makes maintenance easier but can help to prolong the life of your chainsaw.

Pros
  • Containers come in different size options, from 6.4-ounce to a gallon
  • All size options are suitable for any budget thanks to affordable pricing
  • Meets strict ISO GD and JASO FC and FD standards for effectiveness and cleanliness
  • Mixes at almost any temperature and operates even with heat produced by chainsaws
  • Produces low levels of smoke and ash, making it an eco-friendly option
  • The semi-synthetic formula prevents carbon buildup common in other two-stroke oils
  • Minimal residue and deposits to clean for easy maintenance and a long lifespan
Cons
  • Not ideal for older chainsaw models requiring a 32:1 mixing ratio
  • The container is prone to leaking with a loose-fitting cap
  • It may not work for other lawn tools such as mowers and weed whackers

Maxima Castor 2-Stroke Racing Premix Oil

Though it’s billed as a racing oil, Maxima’s two-stroke castor oil is versatile enough to use in anything from a racing engine to your chainsaw. It also comes in a variety of different size options.

The premix is suitable for both leaded and unleaded fuel sources depending on your chosen application. Most chainsaws use unleaded gasoline, though there are exceptions.

This oil contains highly refined castor oil. Unlike petroleum-based options, this oil from Maxima is completely biodegradable so that you don’t have to worry about toxic runoff affecting your garden soil.

As a synthetic oil, Maxima 2-Stroke is slightly pricier than most non-synthetic options. However, it also offers superior performance, even for small yard and lawn equipment.

This synthetic oil includes additives that keep valves clean and clear of deposits, which translates into less need for complex maintenance. It also contains additives to reduce corrosion and carbon buildup to keep your engine running at peak performance.

Maxima two-stroke racing premix keeps your chainsaw lubricated use after use thanks to a specially designed formula. Instead of using lubricants that vaporize after use, Maxima lubricants adhere to cylinder walls, bearings, and more even at high temperatures. You’ll see longer-lasting results than with other similar brands.

One of the most attractive selling features of the Maxima Castor 2-Stroke Racing Premix is the smell. Many people claim that its distinctive scent reminds them of a day out on the racing circuits.

Pros
  • A versatile recipe that works in just about any two-stroke engine
  • Made of refined, biodegradable castor oil
  • Works with both leaded and unleaded gasoline
  • Includes additives for clean burning and low risk of residue deposits or corrosion
  • Long-lasting lubrication that doesn’t evaporate under high temperatures
  • Boasts a pleasant smell
Cons
  • Pricier than most semi-synthetic and mineral options
  • Not suitable for mixing with certain fuels such as 100LL AV
  • May leave some residue around engine exhaust

Choosing the Right 2 Stroke Oil for Your Chainsaw

If you want to get the best performance out of your chainsaw, you need to make sure that you buy an oil that meets your unique needs.

Why Use 2 Stroke Oil?

Two-stroke engines have been around for more than a century. Originally used to power motorcycles, you can now find two-stroke engines in a wide variety of appliances, including chainsaws.

Two-stroke engines don’t have many moving parts to worry about, making them an efficient choice for small-scale applications. They also generate less heat than other engine styles, meaning that they’re safer to use.

Unlike the four-stroke counterpart, found in most cars, trucks, and motorcycles, two-stroke engines don’t self-lubricate. You need to mix gasoline with oil before filling your engine to ensure that moving parts don’t stick.

With the wrong type of oil in your tank, you may see your chainsaw smoke, sputter, or even stop working completely. What’s more, you may cause permanent damage to the interior mechanics, particularly the plugs.

Not all two-stroke oils are created equal. Cheap, generic brands may not be able to handle the temperatures generated by a chainsaw. Instead, it’s best to look for high-quality two-stroke oil.

Two-stroke oil is designed to work with air-cooled, high-performance engines. It’s the best choice for peak efficiency, performance, and longevity when it comes to your chainsaw.

It’s important to remember that not all two-stroke oils are created equal. You should check what type of engine you’re dealing with before adding any fuel. Most chainsaws have a non-water-cooled engine that takes standard two-stroke oil. You should only use outboard two-stroke motor oil with a water-cooled engine.

2 Stroke Vs. 4 Stroke

While two-stroke engines are common in appliances such as chainsaws and weed whackers, most of us are more familiar with the four-stroke engines found in vehicles.

A four-stroke engine contains an oil reservoir along with a sump and pump system for circulation. You don’t have to add lubricants to your car’s gasoline, but instead, ensure that you have clean and fresh oil in the pan at all times.

Two-stroke engines are much less complicated, which makes for easier maintenance and repairs. Unfortunately, it also means that this engine style can’t self-lubricate like a four-stroke, as it has no internal oil reservoir.

With a two-stroke engine, you have to mix oil into the fuel supply itself to ensure that everything remains lubricated. This is why you can’t use four-stroke gas with a two-stroke engine.

Four-stroke mixes contain no oil and thus won’t keep moving parts greased. If you use four-stroke fuel with your two-stroke engine, you’ll likely cause lasting damage to the inner workings.

Types of 2 Stroke Oil

There are several different types of two-stroke engine oils to choose from that differ in cleanliness, efficiency, and price point.

Mineral

Mineral oil, or castor oil, comes from a natural petroleum base and is often the cheapest choice for your chainsaw. Keep in mind, however, that natural oils contain more contaminants and unwanted deposits than synthetic options.

Using mineral oil may leave behind heavy deposits in your chainsaw engine. You may also notice tacky residue that builds on the piston. Over time, all of this debris can build up to slash efficiency and make for difficult maintenance.

Fortunately, you can find mineral oils with minimal additives for a cleaner operation than all-natural options. Some manufacturers will mix in components that improve combustibility and performance at higher temperatures, making them ideal for chainsaw operation.

Synthetic

Full synthetic oil is the most expensive option for two-stroke engines, but it’s also the cleanest. It includes plenty of synthetic additives such as detergents for cleaner running, stabilizers for better efficiency, and octane enhancers to improve fuel rating.

Synthetic oils tend to produce much less smoke and sticky residue than natural mineral oil. It makes maintenance a breeze and may even improve the lifespan of your chainsaw engine. For some, however, the price point can be a deterrent.

Semi-Synthetic

Semi-synthetics offer a happy medium between natural mineral oil and full synthetic options. Though it tends to be more expensive than mineral options, semi-synthetics are generally affordable and effective.

While semi-synthetics are petroleum-based, they include plenty of additives for better combustion and improved lubrication. They also burn cleaner than mineral oils, though not quite as clean as full synthetics.

Mixing 2 Stroke Oil

Before fueling up your chainsaw, you have to mix in your chosen two-stroke oil. Always remember to do this in a clean, empty container to prevent contamination. You should also avoid letting pre-mixed fuel sit for longer than a month or so without added stabilizers.

When mixing, fill your container halfway with gasoline. Then, add the full amount of oil and mix well. Finally, pour in the rest of the gasoline. Mixing your fuel in this way will help to prevent waste or potentially harmful splashback. 

Different manufacturers will call for different fuel-to-oil rations, so it’s always important to read the instructions on the label carefully. In general, most chainsaw manufacturers recommend using fuel with a 50:1 gas to oil ratio. Some older models call for a 32:1 ratio.

In Conclusion

Without the right oil on hand, you won’t get the best possible performance out of your chainsaw. You need high-quality 2 stroke oil for the engine if you want power, efficiency, and longevity. Fortunately, there are plenty of options on the market to suit your unique chainsaw.

Our top pick for the best 2 stroke oil for chainsaw is the Echo Power Blend. It’s clean-burning, eco-friendly, and works in just about any two-stroke chainsaw engine. As a semi-synthetic, Echo’s power blend is cheaper than the Maxima Castor Synthetic Premix. Thanks to special additives, it also has a longer storage life than the Lucas Semi-Synthetic Oil. 

If you’re looking for the best 2 stroke oil for chainsaw, we recommend starting with the Echo Power Blend Xtended 2-Stroke Oil Mix. With a clean, high-quality oil, you can expect to see a noticeable improvement in your chainsaw’s performance.

5 Best Hybrid Table Saws (2021 Reviews)

Are you looking for a hybrid table saw? That often happens when you’re not really sure when picking between an affordable contractor saw and a professional-grade cabinet saw.

For many DIY woodworking enthusiasts, a good cabinet saw may be too much of an overkill. Sure, its professional quality is undeniably terrific. The pulleys and bearings are much stronger. You get flatter tables. It features heavy-duty trunnions attached to the cabinet base instead of the table, so you find it easier to align the saw blade with the miter slot and fence. The cabinet saw motors are typically more powerful.

These cabinet saws are expensive, and they’re not exactly easy to bring along. A lot of these cabinet saws weigh more than 600 pounds. In addition, they also use up much more electrical power.

For all these reasons, the contractor saw has become the standard table saw option for amateur DIYers. The main problem with a contractor saw for some home woodworkers is that it may be too basic and underpowered.

This is where the hybrid saw comes in. It’s a category that bridges the considerable gulf between the more basic contractor saw and the expensive cabinet saw. As a hybrid, it combines features from both the contractor and the cabinet saw so that you get the best of both worlds.

Of course, that depends on the particular hybrid table you get. To make sure you pick the ideal hybrid table saw for your needs, we’ve already made up a list of the top 5 hybrid table saws you can pick from right now.

Best Hybrid Table Saw Comparison Table

Product Picture

Product Name

Motor HP

Rip Capacity

Price

Shop Fox W1819

3 hp

29.5 inches

LAGUNA TOOLS Fusion 36in. Rip 110 V

1.75 hp

36 inches

Shop Fox W1837

2 hp

30 inches

Powermatic 1791230K 64B Table Saw

1.75 hp

50 inches

RIDGID R4512

3.8 hp

30 inches

Top 5 Best Hybrid Table Saw Reviews

Let’s check out what makes these hybrid table saws such great options for your workshop:

Shop Fox W1819 3 HP 10-Inch Table Saw with Riving Knife

Okay, so this is a huge and heavy machine. With the extension, the table measures 27 by 53⅝ inches, and it weighs 457 pounds. The good news is that it you can still get the optional mobile base for this (Shop Fox Model D2057A) so it’s easier to move around.

Even at first glance, it’s easy enough to realize just how well-built this thing is. It’s meant to last for a lifetime, basically. It offers ample power with the 3hp motor, it features a huge cast iron table with wings, and it comes with heavy cast iron trunnions.

We went with the 29.5-inch rip capacity, since we’re looking for a hybrid table saw. It offers plenty of convenient features, with a lot of working space. There’s a version of this with a 49-inch rip capacity, but it’s also heavier and more expensive. With the 3hp motor here, we were able to cut everything we needed to cut for our DIY projects.

Admittedly, we didn’t find it super-easy to assemble this thing at first. We ended up redoing things to get it right. We found the instructional pictures and guides rather unclear and difficult to understand, but maybe it’s just us.

Once we finished with the assembly, we got ourselves an excellent hybrid table saw that really delivers. It really is solidly built. It’s not hard to imagine that it will last long enough that even our grandkids may end up using this model. And it probably won’t be obsolete even after many years.

We especially liked the ability to tilt the blade to the left anywhere from zero to 45 degrees. Not that many hybrid table saws have this feature. This is done by just loosening the blade tilt lock, which then allowed us to turn the adjustment handwheel to put the blade at the angle we wanted. It’s convenient for cutting bevels, chamfers, and compound miters.

The safety features are also very reassuring. You’re able to see what you’re doing clearly, thanks to the clear polycarbonate shield. There’s also a 4-inch dust port. You also get anti-kickback sprawls on the sides of the spreader. It also features a magnetic switch with thermal overload protection.

Yes, this is quite heavy. That’s great for stability, but it’s not so good for mobility and portability. Still, you can get the optional mobile base to get it easier to moved around.

Pros
  • Solid and extremely durable
  • Lots of convenient features
  • Terrific safety features
  • Great value for money
Cons
  • The assembly directions should be improved
  • It’s not exactly easy to move around, though the optional mobile base helps a great deal

LAGUNA TOOLS Fusion 36in. Rip 110 V

If you have a small shop, you can’t really go with a huge table saw. Instead, you can go with this more compact model. With the extension wing, you still get a table size of 44 by 27 inches. It’s also lightweight (comparatively speaking) at 240 pounds, and it’s great that your purchase also comes with a built-in mobility kit.

A lot of things here are relatively easier, starting with the assembly. It was a no-fuss task, thanks to the clear directions in the manual. There’s no need for extensive online research for the assembly, and you won’t have to contact customer support for assistance. But in the off chance you encounter any issues with the assembly or the adjustments, you can always visit the Laguna website, where there are instructional videos that show you what you need to do.

The blades here are also very easy to change. That means it’s no hassle to constantly work on different materials, which usually means you have to change the blades. The blade change system here is so convenient that you won’t really mind.

Even the height and angle adjustment wheels move very smoothly. They’re all pre-lubricated, and Laguna machined the trunnions precisely. In fact, everything here seems over-engineered. You can even wire it for 220v yourself, without needing an electrician.

If you don’t boost it to 220v, then you may have to deal with the natural consequences of using a smaller 1.75hp motor. The blade speed here isn’t exactly professional-grade, as it’s a bit too slow for efficient work. But if you’re not a professional, that’s okay. If it’s not okay, then you can wire it for 220v instead.

Pros
  • Simple assembly
  • Highly efficient design
  • Relatively lightweight and easier to move around
  • Easy to change blades
Cons
  • May not have the power you need for faster work
  • You may have wire this for 220v

Shop Fox W1837 10" 2 hp Open-Stand Hybrid Table Saw

If you’re a relative newcomer to woodcutting, then you don’t really want to start out with an expensive and complicated model. A hybrid table saw is a good option in general. More specifically, you can start out with this affordable hybrid table saw.

Many of its features and benefits seem to have newbies in mind in particular. This starts off with the easy assembly. The instructions are clear, and you don’t even need extra tools to get everything put together properly.

It’s also comparatively lightweight at 260 pounds. We found that it wasn’t a problem when we have to move this table saw to a different spot. Once you find the right spot for this, you’re also able to level the feet so you can make sure the work table is absolutely flat. This feature is great, if you often find yourself moving the table saw to uneven ground.

You do have to check that the table remains flat when you engage the extension. Sometimes this is a problem.

The blade here also tilts to the left at different angles, up to 45 degrees. Just loosen the lock so you’re able to turn the handwheel for the blade tilt, then lock it again. This is most convenient for compound miters, bevels, and chamfers.

The durable cast iron for the trunnions also absorb the vibrations nicely, and it makes sure you get proper miter lot and blade to fence alignment. Making the height and angle adjustments is also quite easy.

For safety features, you get the metal riving knife/spreader that minimizes kickback, by preventing the newly cut material from pinching the saw blade. The transparent guard lets you see what you’re doing when the blade is cutting your workpieces.

This also comes with a dustless cabinet design, while it features a 4-inch dust port. The dust port helps with the maintenance, and also boosts your safety by not hindering visibility.

Pros
  • Affordable
  • Great for beginners
  • Relatively lightweight
  • Feet can be leveled
  • Clear assembly instructions
  • Dustless design with dust port
Cons
  • Table extensions may not be perfectly even

Powermatic 1791230K 64B Table Saw, 1.75 Hp 115/230V, 50-inch Fence with Riving Knife

With the 50-inch fence, some people consider this a contractor saw. It’s also considerably heavy at 470 pounds, and larger with its dimensions of 70 by 32 inches.

But then again, it does have only a 1.75 hp motor, which qualifies this as a hybrid. But it comes in dual voltage and the power isn’t actually as underwhelming as it may seem as first. If you’re dealing mostly with softwoods and plywood, then this is more than adequate. In fact, you can still work with 1.5-inch hardwoods without too much trouble.

This is especially true if you bother to replace the stock blade here with a thin kerf blade itself. It’s not that it’s truly bad, as it’s actually comparable with other stock blades in other table saws out there. It’s just that with the less powerful motor here, you need a better blade for better results.

At least you get a very spacious work table here, along with a 50-inch ripping capacity. The whole table is quite flat as well. The fence also holds true for terrific accuracy.

The bevel and height adjustment handles are also very easy to operate. They’re actually a pleasure to use, in contrast with other handles that seem a lot more annoying to operate. Just adjust them to get the angle or height you need, and then you can lock them in place.

This also comes with an arbor lock that you can access from above the table, so you won’t need dual blade wrenches. Your accessories are also easily accessible, thanks to the storage hooks on the stand.

The blade guard is conveniently transparent, letting you see the cutting work quickly. Also, you get minimal kickback due to the quick-release riving knife. Even the dust port here works nicely, with the built-in dust collection hose doing its job like it’s supposed to.

Pros
  • Great for softwoods and plywood
  • Large workspace with 50-inch ripping capacity
  • Terrific accuracy
  • Excellent quality all-around
  • Plenty of convenient features
  • Safe to use
Cons
  • The power may not be enough for extensive hardwood use

RIDGID R4512 10 in. 13-Amp Cast Iron Table Saw

Admittedly, this is not something you get for continuous heavy-duty work. To be fair, it’s not meant for that purpose. It was designed to fit the needs of enthusiastic DIY hobbyists instead.

That’s why its comparatively affordable, and it’s also nicely lightweight at 260 pounds. It even comes with a wheeled base, which means it’s very easy to move around in your workshop. You have 2 wheels that work with the 2 feet. You just step on the foot pedal to raise the table on its wheels to move it around.

This does come with a powerful motor. It’s prewired for 110v, but the manual gives you instructions on rewiring this for optimum speed. The assembly can be a bit tricky, though, so be prepared to watch YouTube videos on how to do it right.

Even right out of the box, however, you still get 3,450 rpm. It works through a wide range of work pieces without too much fuss already. At 90 degrees, you get a cutting depth of 3.25 inches. At the 45-degree bevel, you also get a cutting depth of 2.25 inches. The rip capacity is 30 inches, with 15 inches to the left of the blade. With the extensions, you’re able to get up to 49×27 inches of workspace.

This does come with a rather ho-hum 10-inch 40-tooth blade with carbide tips. The standard ⅝-inch arbor will let you put in a better blade without any hassle. This can also accept a dado blade up to 13/16 of an inch wide.

This does let you make rather accurate cuts, thanks to the fine fence system and the positive stops on the miter gauge. You also get the standard 4-inch dust port, so you can just attach your vacuum cleaner. There’s also onboard storage for your accessories.

The safety features include the clear blade guard, which you can easily attach or detach without using tools. There’s also the plastic push stick and the riving knife. It also offers an anti-kickback feature.

Pros
  • Ideal for smaller workshops
  • Wheels allow for easier portability
  • Nice set of safety features
  • Accurate cuts
Cons
  • Somewhat tricky assembly
  • Best to replace the stock blade
  • The electrical cord could be longer

Factors to Consider

The best hybrid table saw for one hobbyist may not be the best option for another. It all depends on your particular needs, the size of your woodshop, and your budget limitations. Here are some factors you should keep in mind when you make your final choice.

Brand Name

This isn’t really about brand name snobbery. It’s just that you’re more likely to enjoy reliable performance and durability when you stick to the more famous brands. These brands are generally famous for good reasons—i.e., they tend to offer excellent products.

Price

If you’re a newbie, it doesn’t really make sense that you invest on a high-priced, professional-grade hybrid table saw designed for heavy-duty use. Go with a more affordable model at first.

However, if you’re a dedicated hobbyist already then you may find the smaller hybrid table saws not quite powerful enough for your more advanced projects. In that case, you may want to save up to get the bigger and more powerful hybrid table saws.

Motor

If you only work with softwoods and plywood, then you can go with a smaller 1.75hp motor at 110v. But you may want to upgrade to a more powerful motor if you generally work with hardwoods. At least the motor in a hybrid still doesn’t add to the expense compared to the cost of a full-fledged cabinet table saw motor.

Table Size and Ripping Capacity

The ripping capacity ensures that you’re able to get consistent cuts up to certain lengths. If you generally work with larger pieces, you want greater ripping capacity with deeper cutting depths.

The table size must also be factored in. A huge table may not fit comfortably in a modestly sized woodshop. A smaller table may be better for you, as you still get the extensions when you’re working with larger pieces. Also, a smaller table is easier to move around.

A larger table does offer certain advantages. It allows to work comfortably on larger pieces, and you get the stability you need for consistently even cuts. Larger work tables also tend to last longer, though some of the smaller hybrid tables can still last a very long time.

Convenience Features

These include features that are easy to use and allow you to make reliably accurate cuts. If you’re a newbie, it’s best if the assembly isn’t all that complicated. The finished product should be easy to use. Even experienced woodcutters would rather deal with easy-to-use hybrid table saws, as the small things can add to your sense of frustration.

Try to get a blade that lets you make easy adjustments, as that makes everything work out nicely. And it’s great if you’re able to tilt the blade at various angles. That way, you’re able to make a wider variety of cuts. That makes your hybrid table saw a lot more versatile and useful.

Safety Features

Make sure you get the basic set of safety features, such as a transparent blade guard. The blade guard protects against accidental cuts, while the transparency still lets you see where you’re cutting. Then you also need the riving knife, which reduces the risk of kickback.

Even the dust collection system contributes to your safety, as it lets you see what you’re doing more clearly. Of course, it also makes the job easier and faster, as you’re not forced to clean up while cutting your workpieces.

Keep in mind that these safety factors don’t mean you can ignore the basic safety rules of operating a table saw. Adhere to those safety rules religiously.

Conclusion

There’s really no need for you to just make do with a cheap contractor saw when the features aren’t enough for the kind of work you do in your woodshop. At the same time, you also don’t have to spend a fortune on a cabinet saw when you’re just a hobbyist (or a beginner) and not an actual woodworking professional.

The hybrid table saw is a great compromise, because it’s not a compromise at all. Instead, it can take the best features you want from both the contractor and cabinet saws to give you the precise set of features you need.

Try a hybrid table saw, even if you’re just a newbie. Take your pick—you can go with a lightweight model or a heavier one with more advanced cutting abilities. The best hybrid table saws are all easy to operate and safe to use, especially if you pick from among our top 5 options!

5 Best Table Saw Under 500 Dollars 2021 – Home or Jobsite

If you’re thinking about upgrading your DIY woodworking tools, then you’re probably thinking about replacing your handheld saws. The good news is that you won’t have to spend a fortune for this upgrade. The best table saws under $500 will get the job done, while you still have a tool you can easily bring along to a worksite.

You need a table saw when you’ve become a lot more serious with your DIY woodworking. With the right table saw, you get smoother cuts and straighter lines that what you’d get with a regular handheld saw. You’re able to work with harder wood pieces and you can complete your project more quickly with fewer mistakes.

Best Table Saw Under $500 Comparison Table

Product Picture

Product Name

Weight

Motor Amp

Motor RPM

Cut depth 45°

Cut depth 90°

Rip Capacity

Price

Dewalt DWE7480XA

48 pounds

15-amp

4800 rpm

2¼ inches

3⅛ inches

24 inches

Hitachi C10RJ

96 pounds

15-amp

4500 rpm

2¼ inches

3⅛ inches

35 inches

SKIL 3410-02

67 pounds

15-amp

5000 rpm

2½ inches

3½ inches

24¼ inches

Bosch GTS1031

52 pounds

15-amp

5000 rpm

2¼ inches

3⅛ inches

18 inches

ShopSeries RK7240.1

35 pounds

13-amp

4500 rpm

2½ inches

3 inches

12 inches

Top 5 Best Table Saw under $300 Reviews

Of course, you only maximize the benefits of your table saw if you get a good one. To make sure you get full value for your money, try to pick one from among these fantastic options.

DEWALT 10-Inch Portable Table Saw with Stand (DWE7480XA)

If you’re looking for a nifty table saw for small woodworking projects at home, then you can go with this Dewalt DWE7480XA. It’s quite compact, and you can move it around easily enough as it only weighs 48 pounds. It’s a corded model, so place it near a power outlet.

This comes with a 15amp, 4800rpm motor that works with the preset 24T carbide blades. You’re able to get 24 inches of rip capacity, with 12 inches of maximum rip to the left of the blade. You can cut up to 3⅛ inches at 90 degrees, and up to 2¼ inches at 45 degrees.

The table coating here minimizes the friction so you’re able to cut more smoothly, while the rear feet are adjustable so that the saw is always level even if you’re working on an uneven work space. Instead of a plastic base, you have a metal roll cage base for greater stability and durability.

You’re able to make fast and accurate adjustments, thanks to the rack and pinion telescoping fence rails. You don’t need tools to adjust the guarding components, due to the Site-Pro Modular Guarding System. These components are easily accessible, thanks to the onboard storage.

Cleanup doesn’t have to be tedious once you’re done, due to the dust port. The 2.5-inch dust port collects the dust and debris, which also minimizes the risk of a clogged blade.

Pros
  • No problem to assemble
  • Effective anti-kick-back mechanism
  • Great anti-kick-back mechanism
  • Durable and stable stand
  • Terrific rip fence gauge
Cons
  • You can’t use dado blades on this
  • Miter gauge is a bit flimsy

Hitachi C10RJ 10" 15-Amp Jobsite Table Saw with 35" Rip Capacity and Fold and Roll Stand

If you’re confused about the Metabo HPT branding in some ads, that’s just the new name for Hitachi Power Tools. You still get the expected features here, despite the new name. These include the 15-amp motor that gives you up to 4,500 rpm, along with the 10-inch blade with the 40 carbide-tipped teeth.

This is quite easy to use, starting with the soft start function. This function minimizes the noise along with the recoil, so you can start more smoothly. The power switch is larger than usual, and it also features an emergency off safety cover.

The mild start seems surprising at first, since this thing is comparatively huge. It weighs 96 pounds, but then you also get a 35-inch rip capacity. The feed support starts up to 28¾ inches (by 2 inches), but the telescoping table extension offers more, with a ripping capacity of 22 inches to the left.

You get your standard bevel range up to 45 degrees, with a cutting depth of 3⅛ inches at zero degrees and 2¼ inches at 45 degrees. The bevel scale and bevel height adjustment knobs for the blade are on the cabinet front so you’re able to get to them more easily.

For even greater safety, you have a truly effective electric brake that stops the blade rotation almost instantaneously. There aren’t really all that many safety features here, though. But at least it folds for easier storage and transport. When you do open it up for use, it’s stable enough for accurate cuts.

Pros
  • Huge rip capacity
  • Soft start with large power switch
  • Electric brake stops the blade immediately
  • Onboard storage for tools
  • Stable when folded out
Cons
  • No dado blades
  • Not that many safety features

SKIL 3410-02 10-Inch Table Saw with Folding Stand

This one is extremely popular, and it’s often out of stock. That’s usually because it’s compact and affordable, but it offers a nice set of useful features that satisfies the needs of so many DIY enthusiasts.

This isn’t all that heavy, since the 20-inch by 26-inch work table is made from aluminum. If you’re working in a rather cramped area, this works out nicely/

This can still extend to 32 inches long when you need more space. The bevel range is from 2 to 47 degrees, and you’re able to get accurate cuts due to the EZ View measurement system and the self-aligning rip fence.

Even the setup is quick and easy thanks to the Quick-Mount system, which uses a heavy-duty steel stand for reliable stability and durability. This won’t wobble at all, so you can get accurate cuts all day long.

This gives you a lot of power, maxing at 5,000 rpm with ample cutting depth and a bevel range of zero to 47 degrees. You’re able to cut down to 3.5 inches at 90 degrees, and to 2.5 inches at 45 degrees. The maximum dado width is 13/15 of an inch.

Perhaps the only notable drawback here is the lack of a dust extraction system. This lack can be annoying for longer projects, since the need to clean up in the middle of the job adds to the time.

Pros
  • Fast blade speed
  • Steel stand offers reliable stability
  • Compact
  • Nice rip capacity and cutting depth
Cons
  • No dust extraction system

Bosch 10-Inch Portable Jobsite Table Saw GTS1031 with One-Handed Carry Handle

Even for experienced DIY enthusiasts, the simplicity of the Bosch GTS1031 design is always great. It’s lightweight at just 52 pounds, and even the setup is simple. It shouldn’t take more than 5 minutes to set everything up.

This comes with the 10-inch carbide blade with 24 teeth, but you can always replace the blade with something better without any trouble. With the Smart Guard System, putting in a new blade takes only a few moments. This also comes with a reliable dado insert capability.

The purchase includes the anti-kickback device, riving knife, and barrier guard, and all of these are easy to put in. The standard blade itself offers an 18-inch rip capacity, with a 2¼-inch cutting depth at 45 degrees. At 90 degrees, that goes up to 3⅛ inches.

It’s easy to move this around, with the handle and the set of wheels underneath. Once you’re done, you can just fold up this table saw and store it easily.

This isn’t really for larger projects, if that 18-inch ripping capacity didn’t clue you in. But this is great for smaller projects, and you can move it around without issue. You also have lots of safety features here, which is great for newbies.

Pros
  • Simple setup
  • Easy to move around
  • Dado insert capability
  • Quick blade changes
  • Lots of safety features
Cons
  • It’s a bit noisy
  • The clamping lever can be tricky

ShopSeries RK7240.1 13-Amp 10" Table Saw with Stand

With the 13-amp motor, you shouldn’t really rely on this for larger projects. But this works nicely for smaller projects, and also saves you a ton of money along the way. It’s easy to move around, since it weighs less than 35 pounds.

It’s compact, but you still get more than 400 square inches of work space with the cast-aluminum table. You still get the push stick, miter gauge, quick-release rip fence, and blade wrench.

This features a 10-inch adjustable-depth tungsten carbide blade, which bevels up to 45 degrees. It can cut up to 2.5 inches at 45 degrees, and up to 3 inches at 90 degrees.

Your purchase also comes with the sturdy metal leg stand, along with the nifty integrated dust collection port for easier cleanup.

All in all, this is a light-duty table saw for hobbyists, and not for pros. That’s why it’s so affordable, and also quite compact. If you’re not really going to use your table saw too frequently, then you won’t have to shell out the big bucks for a more expensive unit. This one will do, since it works nicely with materials including trim and siding.

Pros
  • Very affordable
  • Compact and lightweight
  • Plenty of workspace
  • Easy to use
  • Comes with a dust port
Cons
  • Lacks power for heavy duty use

Safety Tips

Since you’re working with a power tool with sharp teeth that rotates more than 4,500 times per minute, you really must be careful. Here are some tips that can minimize the risk.

  • Never wear any loose clothing that may end up getting caught in the blade.
  • Visibility is always a crucial factor. Make sure you have a bright enough light to work with. Keep your working area clear of all the debris.
  • Put in all the safety accessories that come with the table saw. Make sure they all work even before you power the table saw.
  • Where’s the emergency power switch button? Make sure you know where it is, so you can quickly power off the table saw if anything goes wrong.
  • If you have to make any adjustments while you’re working, make sure that the blade isn’t moving at all. In fact, disconnect the table saw from the power outlet first, just to be on the safe side.
  • Check your work pieces before you feed them to the blade. You’ll want to make sure that there aren’t any foreign objects that can get in contact with the spinning blade.
  • Don’t stand right in front of the blade when you’re cutting wood. Always stand to the side, in case of any kickbacks.
  • Minimize kickbacks by keeping your table saw blade sharp.
  • Don’t work with wet wood pieces. The wet wood may slide and lead to accidents.

Conclusion

Just because you have a $500 budget for a table saw doesn’t mean that you have to go with any table saw with the right price. You also need to make sure that the table saw comes with all the right features.

Perhaps the most crucial feature is that the table saw must give you accurate cuts. That’s what matters the most. Without accurate cuts, you’ll mess up your projects and all your work can look absolutely rubbish.

If you’re a newbie, then it matters greatly that you’re able to use the table saw without too much trouble. If you’re moving the table saw around, then go for a more compact model that you can move from one location to another without any hassle.

Safety features also matter, though you need to take all the safety precautions into account. That’s always up to you, so you better be careful.

All in all, a table saw offers a lot of use for your woodworking project, and you won’t have to spend a lot for a good one. The best table saws under $500 can really give you a lot of help!

Best Budget Table Saw under $300 in 2021

Just because you don’t have a large budget for your table saw doesn’t mean you have to make do without one. It’s true that a lot of good table saws cost quite a bit of money. After all, you get what you pay for. Yet it’s also true that in many instances you may best be served by the best budget table saws under $300.

Sure, if you only have $300 to spare for a table saw then that’s that. But in some cases, even if you have a larger budget for a table saw, a $300 table saw may still be your best choice. That may be true if you’re only planning to use it for a few occasions, or if you simply need something simple and compact.

Which leads us to a natural question—how do you pick the right table saw for your meager budget? The fastest way is to just consult our list of recommended table saws, all of which cost less than $300. Yet despite the low prices here, they sure offer a lot of bang for the buck.

Best Table Saw under $300 Comparison Table

Product Picture

Product Name

Weight

Motor Amp

Motor RPM

Cut depth 45°

Cut depth 90°

Rip Capacity

Price

Dewalt DWE7485

54 pounds

15-amp

5800 rpm

1.75 inches

2 9/16 inches

24.5 inches

Dewalt DW745

48.4 pounds

15-amp

3850 rpm

2¼ inches

3⅛ inches

20 inches

Bosch GTS1031

52 pounds

15-amp

5000 rpm

2¼ inches

3⅛ inches

18 inches

Tacklife MTS01A

47.4 pounds

15-amp

4800 rpm

2 inches

2⅘ inches

16.5 inches

Rockwell BladeRunner X2 RK7323

17 pounds

5.5-amp

3000 rpm

Depends on materia

Depends on materia

6 inches

Top 5 Budget Table Saw under $300 Reviews

Here’s a closer look at the table saws you should consider with your $300:

Dewalt Table Saw for Jobsite, Compact, 8-1/4-Inch (DWE7485)

With an 8.25-inch bar length, this is obviously not meant for thicker tree limbs and trunks. But it’s a Dewalt, which means a lot. It’s not some fly-by-night brand at all. The fact that the DWE7485 is also a bestselling model should tell you something.

This sure is a compact model, so portability and storage aren’t problems. But you don’t really have issues with the ripping capacity at all, and it should be able to do most of the woodcutting jobs you need to do.

You also get the usual features and accessories, despite the low price. Making fence adjustments here is quite easy, thanks to the rack & pinion telescoping fence rails. You also get onboard storage for your miter gauge, fence, guard, and wrenches.

With the Site-Pro Modular Guarding System, you can also adjust the guarding without the need for tools. All in all, it’s easy to use.

It’s also very safe. There’s the blade brake, of course. But you also have the power-loss reset feature that you’ll appreciate after a power disruption. If you forget and leave the table saw in the “on” position, this feature keeps the table saw from suddenly activating once the power comes back on.

Get this for making small cabinets and for general home use. Despite the size, it’s quite powerful and durable. The design gives it a lot of stability, leading to accurate cuts. The integrated measurement bar is accurate enough for the vast majority of the tasks you’ll do. You’ll only need to micro-adjust with the measuring stick if you need accuracy down to 1/32.

Even the smaller blade here isn’t a hindrance. In fact, it may even be a blessing in disguise. The smaller blade leads to higher rpm levels, which in turn leads to cleaner cuts.

If there’s something wrong with this, it’s the manual. It’s not really all that detailed and comprehensive. Check out videos on YouTube to find out what you can really do with this little beast.

Also, the stand isn’t part of the purchase. With the stand, the price may be beyond your $300 budget.

Pros
  • Compact and lightweight
  • Very durable
  • Lots of reassuring safety features
  • Offers accurate cuts
  • Very easy to use
Cons
  • Incomplete manual, not enough for newbies
  • A bit expensive (no stand with the purchase)

Dewalt DW745 10-Inch Table Saw, 20-Inch Rip Capacity

This is another Dewalt, if you want a somewhat bigger table saw that can deal with 8-inch tree trunks and limbs. It’s a corded electric model with a compact size, light weight of 22 kg (48.4 pounds), and a 15-amp motor. You get 20 inches of rip capacity on the right side, and 12 inches to the left of the blade.

This will also give you somewhat deeper cuts, as you can cut down to 3⅛ inches at 90 degrees and 2¼ inches at 45 degrees. You’re able to get quick, accurate adjustments with the quick bevel lock.

The cast table top design makes sure you can do your cuts accurately, while the steel roll cage protects from any accidental drops or impacts. There’s even an overload protection system here, to help you in case you put in frozen or wet woods, or even wood pieces that are just too hard.

The Site-Pro Modular Guarding System is still present, which gives you the ability to make quick adjustments without tools. The onboard storage offers ready access to the Site-Pro Guarding components and the push stick.

Cleanup is also convenient, thanks to the dust collection port. It measures 2.5 inches, so just use the appropriate Shop-Vac with it.

Pros
  • Adequate rip capacity (especially for its size)
  • Fast, clean cuts
  • Quick adjustments for guarding components
  • Very lightweight
  • Durable
Cons
  • Low rpm not meant for heavy-duty cutting
  • Some may have issues with the dust port

Bosch 10-Inch Portable Jobsite Table Saw GTS1031 with One-Handed Carry Handle

This is another extremely popular table saw model from a well-known brand, proving once again that you’re not limited to no-name brands because you can only afford $300 for your table saw. Again, your money gets you a corded electric model, and your purchase still gets you a carbide blade, 2 wrenches for changing the blade, a push stick, a miter gauge, and a rip fence.

This should be easy to carry to another spot, since it weighs only 52 pounds. This even has a handle that lets you carry it with just one hand.

For your safety and convenience, this also comes with the Smart Guard System modular blade guard which you can attach and detach in just a few seconds. You also have the riving knife to prevent kickbacks, and the pawls attached to it also help. This also features a 2-inch dust port, to help with visibility and the cleanup afterwards.

This is a great table saw to get if you don’t really need a table saw for heavy duty work. It’s a simple tool to use for light duty tasks, and the rip fence is especially easy to adjust. You basically just lift the lever, put in the fence where you want it, and then you lock it down. Virtually every time, you get the alignment you want.

Some do mention that they find the rip fence lever a bit too stiff for their taste, but it’s best to let it be. Loosening it up may do more harm, since this can lead to imperfect alignment instead. Getting imperfect cuts is certainly worse than just putting up with a stiff lever.

Pros
  • Compact and portable
  • Offers ample power
  • Easy rip fence adjustments
  • Lots of modular safety features
  • Has onboard storage
Cons
  • Somewhat stiff rip fence lever
  • Not really for heavy-duty cutting

TACKLIFE Table Saw, 10-Inch 15-Amp Table Saw, Cutting Speed up to 4800RPM, Aluminum Extension Table, 24T Blade, 45ºBevel Cutting, Jobsite Table Saw with Stand, Miter Gauge, Push Bar - MTS01A

This is a small table saw for small cutting tasks. That’s pretty evident with the 16-inch ripping capacity, and the cutting depths of 2.8 inches at 90 degrees and 2 inches at 45 degrees.

But for these light duty tasks, this particular table saw is very easy to use. This starts with the superb stability, thanks to the solid iron stand and the triangle support feet. There’s no tilting while cutting.

The 25.3”x 28.3 dimensions also give you a more compact footprint, but the arms of the table do extend to the sides for more space if you need it. Sliding the wood on the table surface is also a lot smoother, thanks to the aluminum coating that reduces the friction. The fence also stays straight and it locks in place securely.

The onboard storage lets you get the Allen wrench and the push stick whenever you need them. The blade guard safety feature is also transparent, so you still get the visibility you need to do the work precisely. The dust shouldn’t impair your vision either, thanks to the 2.25-inch dust port.

This is extremely affordable, and it really doesn’t feel expensive at all. You do want to make sure you get the assembly right, which means using the right ratchet wrench to tighten things up properly.

All in all, this is a no-fuss table saw that works well enough for the low price you pay for it. Sure, it’s simple and compact. But it gets the job done, as long as you’re not using it for long, heavy-duty tasks.

Pros
  • Very affordable
  • Lightweight and compact
  • Offers smooth and easy use
  • Comes with a dust port
Cons
  • Brand name is fairly new (founded in 2015)
  • Limited cutting capability

Rockwell BladeRunner X2 Portable Tabletop Saw with Steel Rip Fence, Miter Gauge, and 7 Accessories – RK7323

This is extremely affordable as well—in fact, with your $300 you can buy yourself one and another one for a friend. Your friend will thank you for the gift, as it works out nicely.

Just put this on a completely level tabletop, and you can get to work quickly. The assembly isn’t any trouble at all. The setup takes only a few seconds, and then you get yourself a table saw that weighs about 17 pounds. That’s not a typo—that’s really seventeen pounds.

That weight already takes into account the onboard storage, which houses the rip fence and the miter gauge. This also accommodates the extra blades that come with the table saw. You actually get 5 different T-shank blades, which gives you a lot of versatility. You’re able to rip, miter, scroll, and do inside cuts. These blades can even work with ceramic tiles, metal such as aluminum, and wood. Changing the blades is also quick and easy—it takes only 3 seconds.

The cutting depth also depends on the material:

  •   Wood, 1½ inches
  •   Aluminum, ⅜ of an inch
  •   Steel, ⅛ of an inch
  •   Ceramic, ⅜ of an inch

For such a small and super-lightweight table saw, you sure get a mean machine that can do much more than you’d expect. Sure, you only get 5.5 amps of power with just 3000 rpm. But it sure does a lot on a wide variety of materials!

Pros
  • Extremely lightweight (can be carried with one hand easily)
  • Very compact
  • Easy assembly
  • Comes with 5 blades
  • Blade changes in seconds
  • Safety switch prevents accidental start
  • Works with many materials
  • 0-60° miter cuts
Cons
  • Limited rip capacity
  • Limited cutting depth
  • Not for thick tree limbs

Benefits of a Budget Table Saw

Lightweight

An affordable table saw is often rather portable, which is an advantage when you wish to use the tool for various places. Because of its compact size, its also ideal for limited workspaces, as the cramped space won’t really affect the table saw’s crosscut capacity.

Low Energy Costs

Most lightweight table saws don’t use up a lot of power. That means you don’t inflate your energy bills.

Safer

It’s been noticed that there are fewer accidents that involve a smaller portable table saw compared to the number of accidents involving a stationary table saw.

Safety Tips

Of course, just because the portable table saw is generally safer doesn’t mean you can overlook the need for safety features. Also, here are some safety tips that you should also keep in mind:

  • Unplug the table when you’re not using it. That means don’t plug it in until you’ve assembled it properly, and keep it unplugged when making changes to the blade or making adjustments.
  • Always use the right blade for the workpiece material.
  • Make sure the blade is always sharp and clean. That should minimize kickbacks.
  • Test all the safety features to see that they’re working.
  • Secure the workpiece properly before you start cutting. Check that the workpiece doesn’t have any foreign materials that can lead to kickback.
  • Don’t ever hold the workpiece with your bare hand, or across your body.
  • Set the blade at maximum speed before you feed the stock.
  • Keep a stable footing. Don’t over-reach. Don’t stand in front when making cuts.
  • Wear ear buds. In fact, wear goggles and gloves, and avoid loose clothing.

Issues with Cheap Table Saws

The old adage about getting what you paid for holds true with budget table saws, for the most part. You have to manage your expectations. You may have to be reading for the following scenarios:

You Can’t Really Work with Thicker Logs

These aren’t designed for larger work pieces. That’s something you need to know right away. If you’re working with lots of thick, long pieces of wood, you better save up for something bigger.

The Vibration Can Be Tough

That’s another issue you need to be able to handle. You need to find ways to keep the tool stable, so you still get the accurate cuts you want.

It’ll Be Noisy

This is because the lightweight models don’t really have a cabinet housing for the motor. So, you better use it in a workroom with adequate soundproofing, or else you’ll bother the whole house. You better wear ear buds too.

Conclusion

Sure, you do have to put up with some minor issues when you have a very limited budget for a table saw. But you can still get an excellent table saw even if you’re limited to just $300. In fact, if you only need a table saw for small jobs, you don’t really need to spend more money.

The fact of the matter is that smaller table saws are actually better for cutting smaller wood pieces. These things are also great if you tend to use it in different places. The lightweight models are easy to transport.

All you have to do is to make sure you’re not getting a table saw that’s also super-cheap in quality. It should still be safe and easy to use, while it gives you the accurate cuts you need. It ought to last a long while too. Try any budget table saw on our list, and you’ll get the best bang for the buck!

Best Pocket Chainsaw for 2021 [Review & Guide]

Who says chainsaws have to be huge monstrosities that are super-dangerous and make a great deal of noise? A pocket chainsaw is much more compact and lightweight, so they’re great for camping. You can whip one out and cut large tree limbs for your firewood.

But you can use this in your own property as well. When you’re cutting errant tree limbs on your backyard, you don’t have to use ladders and an electric chainsaw to cut down on these high branches. You can just use some rope to extend the reach of the pocket chainsaw, set the pocket chainsaw over the limb, and then push and pull.

Of course, it matters a great deal that you get the right pocket chainsaw. To make sure you’re getting the best bang for the buck, here are some excellent pocket chainsaws you can choose from.

Best Pocket Chainsaw Comparison Table

Product Picture

Product Name

Handle Material

Freebies

Price

Sportsman Pocket Chainsaw 36 Inch

Cross-stitched fabric

Heavy duty nylon storage pouch, 8mm round fire starter

Skyocean Pocket Chainsaw with Paracord Handle

Paracord

Belt loop pouch

SUMPRI Pocket Chainsaw Survival Gear -36 Inch

Cross-stitched fabric

Belt loop pouch, all-weather fire starter

Sportsman Industries Paracord Pocket Chainsaw 36 Inch

Paracord

Belt loop pouch

Homyall 48 Inch

Enhanced nylon

Belt loop pouch

Top 5 Best Pocket Chainsaw Reviews

Here’s a quick look at 5 of the best pocket chainsaws you can choose from right now:

Sportsman Pocket Chainsaw 36 Inch Long Chain & FREE Fire Starter Best Compact Folding Hand Saw Tool for Survival Gear, Camping, Hunting, Tree Cutting or Emergency Kit. Replaces Your Pruning & Pole Saw

Unlike most pocket chainsaws that are only 24 inches long, this one comes with a length of 36 inches. The chain is thicker as well, so this one won’t be as quick to break. In fact, this even comes with a lifetime guarantee, which tells you exactly how confident the Sportsman Industries brand is with the durability of this pocket chainsaw.

The cutting teeth are bidirectional, and they’re self-cleaning as well. That means the design works to clear the teeth of the wood chips so you can always make a fresh cut with each pull. With the 65 mn high carbon steel, you can cut down a 4-inch trunk in just a minute.

Obviously, the steel will eventually get dull, but it’s not really a problem to sharpen the teeth. Just use a regular 5/32 round chainsaw file and you’re good to go.

It’s easy enough to bring this along with you, as it’s compact and definitely lightweight. It also comes with a belt pouch, so it’s always available when you go hiking or camping.  It even comes with a magnesium fire starter, so you basically have a complete kit to build a fire in the bush.

Pros
  • Longer length
  • Extremely durable
  • Hard steel
  • Comes with belt pouch and fire starter
Cons
  • Can get stuck in the wood until you learn to use it properly

Skyocean Pocket Chainsaw with Paracord Handle (24inch-11teeth) / (36inch-16teeth) Emergency Outdoor Survival Gear Folding Chain Hand Saw Fast Wood & Tree Cutting Best for Camping Backpacking Hiking Hunting

While this is also available in 24 inches, we went with the 36-inch version. The longer one is just more effective, and easier to use as well.

It’s not as if the extra foot adds problems with the portability, since this also comes in a small pouch for your belt. The chain folds down to just 6 inches, and it weighs less than half a pound.

This uses high carbon steel, and with the 16 teeth in the saw you can make short work out of cutting firewood. A 7-inch trunk should take only about 10 minutes or so. This also comes with a self-cleaning design so you’re able to make fresh cuts every time.

What really makes this special is the handle, which is made from corded paracord. As is, it’s easy and comfy enough to use the handle. When you untie the paracord, you have a tough rope that extends up to 275 inches (that’s more than 22 feet). This paracord can handle weight of up to 220 pounds.

Perhaps the main drawback here is that you really should think carefully before you untie that paracord. If you do untie it, then you better make sure you can tie it back so you get back the handles for the pocket chainsaw.

Pros
  • Longer length of 36 inches
  • Still compact
  • Comes with a pouch
  • Handle is made of tough, useful paracord
Cons
  • Bothersome to retie the paracord handle

SUMPRI Pocket Chainsaw Survival Gear -36 Inch Long Chain & Free Fire Starter Kit -Compact Hand Saw for Trees -Folding Hand Saw Tool for Camping, Hunting Emergency Kit -Backpacking Gadget Camp Saw

Yes, this also comes with the pouch. That makes everything easy to carry around, considering that you have a 360inch pocket chainsaw here.

Also, the pouch carries the fire starter kit that comes with the purchase. This fire starter is water-resistant, so you can even get it to work in the rain.

The pocket chainsaw itself is quite effective. The bidirectional design of the teeth means it cuts through the wood back and forth. The handle is nothing special, though the cross-stitch nylon works well enough.

It doesn’t take long to cut down a tree limb. We actually counted 80 pulls on the chainsaw to cut down a 4-inch tree limb. It takes about 45 minutes to cut down a 6-inch tree limb, though we were taking it easy at the time. One of us went berserk and really worked quick, so that it didn’t take that long to cut down a 10-inch tree limb.

You can also resharpen the teeth using a regular 5/32 or 4mm round chainsaw file. For a longer lifespan, you may want to use 3 in 1 multi-purpose oil when you store this thing. When you take it out to use, just give it a quick spray of good old WD-40 before you start sawing.

Pros
  • Very quick and effective
  • Longer length
  • Comes in a pouch
  • Also comes with fire starter kit
Cons
  • Requires a bit of maintenance for longer lifespan

Sportsman Industries Paracord Pocket Chainsaw 36 Inch Long Chain. Best Compact Folding Hand Saw Tool for Survival Gear, Camping, Hunting, Tree Cutting or Emergency Kit. Replaces Your Pruning & Pole Saw

What Sportsman Industries did here was to take their best-selling pocket chainsaw and then improved it by putting in military-grade paracord for the handles. They’re serious when they say this paracord is tough, since it’s been tested to work with 550 pounds!

The pocket chainsaw itself works quite effectively, starting with its 36-inch length. The teeth are bidirectional and self-cleaning, plus they’re made with 65 mn steel. It also comes with a lifetime guarantee, though you’d have to buy your own fire starter kit.

This thing has made quite a name for itself since 2018, as it’s been featured in the news (including ABC, NBC, CBS, and Fox News). Take it with you when you go camping, as that’s easy enough with the pouch it comes in.

Pros
  • Featured in the mainstream media
  • Extremely popular
  • Very effective
  • Comes with heavy duty paracord handles
  • Designed to last a lifetime
  • Also comes in a pouch
Cons
  • You’ll need to learn to retie the paracord to get back your handle

Homyall 48 Inch High Reach Tree Limb Hand Rope Chain Saw for Tree Trimming-Upgraded Pocket Manual Chainsaw with 62 Sharp Blades on Both Sides for Gardening Camping Survival Gear-No Ropes Included

If you’re thinking twice about retying paracord handles, then you can breathe easy with the regular nylon handles on this pocket chainsaw. It’s even bright orange, so it’s easier to find on the ground.

Undoubtedly the most notable feature here is that both sides of the chain feature cutting teeth. That means you won’t have to waste time maneuvering the chain on its proper side before you can start sawing on a high tree limb. It really won’t matter how it lands on the limb.

But it’s also worth mentioning that this is even longer at 48 inches. We put in some long rope on it and then set it to use for a tree limb about 25 feet in the air. The limb had a diameter of 12 inches, and we didn’t have any trouble at all. It did help that we sprayed some WD-40 on it, just to be on the safe side.

This is quite tough as well. This chainsaw features arched double layered riveted links, which strengthens the connecting chain while they also stabilize the flex.

Pros
  • 48 inches long
  • Cutting teeth on both sides of the chain
  • Easy to see handles
  • Also comes with a pouch
Cons
  • You may need some practice to use this right

Advantages of a Pocket Chainsaw

A pocket chainsaw is simply a chain that resembles the chain on your bike. It’s just that this chain has cutting teeth, which you can set on a tree limb or trunk. Just start pulling on each side, and you’ll hack your way through. Better yet, get someone to help so you can alternate pulling on each side.

Using this tool offers a lot of cool advantages:

Portable

This is perhaps its main advantage over its bigger electrical sibling. Just about all versions of pocket chainsaws are small enough to fit inside a 6-inch belt pouch. They rarely weigh more than half a pound.

They’re Great for Tight Spaces

That’s another advantage of being so small. This can cut in areas or from certain angles that are impossible for your full-sized chainsaws.

No Need for Electricity

This means you won’t have to figure out how to connect a series of extension cords to get your electric chainsaw to the tree on your lawn.

That also means you don’t emit noxious gas, or make a lot of noise. That’s great for your neighbors, and even for your own family. It’s completely eco-friendly.

Simple Design

The lack of complexity in the design means that fewer things can go wrong. This can last a long while, especially if you’re careful enough to pick the right brand. You can also oil the pocket chainsaw when you store it, and then put some WD-40 on it before you use it.

With electrical chainsaws, it’s a different story. A lot of things can go wrong, and breakdowns happen a lot more often than we would like.

Saves Your Knife Edge

Even if you have a tough knife for camping, it’s really better to save the edge from dulling by using a pocket chainsaw instead. Use the knife to cut down on tree limbs, and it’s likely you’ll need to resharpen the knife blade at the end of the day.

Conclusion

When you’re camping, it’s often crucial that you get a fire going. That’s especially true when it gets cold or dark.

That means you’ll need firewood, and for that you’ll need a pocket chainsaw. This can make the whole task a lot easier, and it gets the job done faster.

Also, you save the edge of your camping knife for other tasks. Hacking on tree limbs aren’t really good for most camping knives. These knives are often hard, and that usually means they’re also brittle. Use a hunting or camping knife as an axe at your peril.

Pocket chainsaws are also very convenient for home use, especially if you have trees in your property. This can take care of errant tree limbs very quickly, without having to use an electric chainsaw, extension cords, and a ladder.

Just use long ropes for the sides of the pocket chainsaw, and then set them on the limb high up in the air. Set the teeth properly, and start pulling. With the pocket knives on our list, that’s a job that won’t take all that long!

Best Lightweight Chainsaws 2021 – Top 6 Small Chainsaws

Sure, there’s always a need for heavier chainsaws. But more often than not, these beasts are better left to more professional outfits. For the rest of us, the best lightweight chainsaws are much more ideal for DIY projects around the house, and for small jobs at worksites. They’re easier to use and transport, plus they tend to cost less than their heavier counterparts.

Of course, this leads to a rather crucial question—which of the lightweight chainsaws are best for your needs? There are obviously too many options in the market to consider, so we’ve made it a lot easier for you by winnowing down your potential options into one nifty list.

Best Lightweight Chainsaw Comparison Table

Product Picture

Chainsaw Model

Weight

Power Source

Price

BLACK+DECKER 20V MAX Cordless Chainsaw, 10-Inch (LCS1020)

7.2 pounds

Battery

Husqvarna 16 Inch 440e II Gas Chainsaw

9.8 pounds

9.8 pounds

WORX WG305 Electric Chain Saw, 14-Inch

6.6 pounds

Corded Electric

Oregon CS1500 Self-Sharpening Electric Chainsaw

12.9 pounds

Corded Electric

Poulan Pro PR4016, 16 in. 40cc 2-Cycle Gas Chainsaw

13 pounds

Gas

Greenworks G-MAX 40V 16-Inch Cordless Chainsaw, 4AH Battery and a Charger Included 20312

10.36 pounds

Battery

Top 6 Best Lightweight Chainsaw Reviews

Here’s a quick look at the best lightweight chainsaws you can get right now:

BLACK+DECKER 20V MAX Cordless Chainsaw, 10-Inch (LCS1020)

While this comes with a “tool only” option, we went for the more convenient kit. That means we also got the 20V MAX Lithium Battery pack and charger for the unit.

This is your best option, too, since the battery can stay charged up to 5 times longer than other battery options. You can probably do up to 40 cuts for tree branches measuring 4 inches thick. Some of us were even able to cut down enough branches to fill 2 trailer loads. It’s even better if you have other B+D tools with their own battery packs, as you can then use those battery packs as well.

This is a terrific option for basic lawn services like cutting fallen branches and pruning the branches off your trees. It features a 10-inch bar length, and it’s pretty lightweight at merely 7.2 pounds. That means it’s much easier to maneuver, plus you can use it for a longer time before you get tired.

Maneuvering the lightweight chainsaw is a snap, thanks to the wraparound handling. You can quickly do vertical and horizontal cuts without any trouble. The chainsaw is extremely easy to control, and comfortable to hold.

The bar and chain offer quick, smooth cuts, especially with the built-in oiling system for lubrication. This oiling system has even been improved, so you also get a clear window to constantly update on your oil level. Just remember that it is a manual oiler, so you’ll need to press for the oil for every cut.

A lot of newbies love this chainsaw, and it’s a particular favorite among female users. The extremely light weight is a definite plus, as you won’t need to much strength and endurance to finish the job. You can easily make adjustments for the chain tensioning, since you won’t need tools.

It does need at least 5 hours to get a full battery charge, and you might even need 8 hours. So, you’ll need to do this overnight before you get to doing your wood cutting in the morning. Then you have to be mindful that a full charge gives you just 20 minutes of use.

Pros
  • Extremely lightweight
  • Easy to maneuver
  • Can use other B+D power packs
  • Clear window to see oil level
  • Enough power for most tree branches
Cons
  • Not meant for thicker tree trunks
  • Needs overnight charging
  • Full charge gives you just 20 minutes of use
  • Manual oiling system

Husqvarna 16 Inch 440e II Gas Chainsaw

This is the 2nd-generation 440E, which comes with even more and better features than the first one. The upgraded design makes this even easier to use, while it’s also more efficient. As this is a gas chainsaw, power shouldn’t be a problem. The idling speed is 2,900 rpm, but you can boost that up to 9,000 rpm.

This is nicely lightweight at 9.8 pounds, so it’s no trouble to move around and maneuver. You’re able to cut more freely, leading to more accurate cuts. The new “X-cut” chain and bar system works very well, as it is designed specifically for cutting tree branches and even small trees.

The X-torque feature enhances the fuel efficiency of the whole chainsaw, which means lower fewer costs and longer work times for a full tank. This feature even reduces the emissions level, so it’s relatively eco-friendly compared to other gas chainsaws.

This X-torque feature even makes it a lot easier for you to start the chainsaw. While other gas chainsaws may require several pulls to get them started, with the 440E you only need a couple of pulls at the most. In most cases, a single pull will do.

For those who are irked by a manual oiling system (which requires you to push a button for a few seconds for each cut), this time the oiling system is automatic. All you really need to do is to keep the oil bar filled, and the system delivers the oil to the blade automatically. The X-torque system even minimizes the risk of the oil flooding the engine.

This automatic oiling system is extremely convenient for newbies, as beginners often think the manual oiling system is malfunctioning (when actually it’s because they’re not doing it right). Newbies will also appreciate the inertia-activated chain brake, which kicks in automatically when kickback suddenly happens.

Even experienced chainsaw users will like how easy it is to use this chainsaw. Making adjustments to the chain tension doesn’t need any tools. The quick-release filter lets you replace the air filter quickly.

Pros
  • Lightweight and compact
  • Nice safety features
  • Automatic oil delivery
  • Easy start
  • Efficient fuel system with lower emissions
  • Quick-release filter
Cons
  • A case would have been nice
  • It’s not meant for large cutting tasks

WORX WG305 Electric Chain Saw, 14-Inch

Now this may come with a 14-inch bar length (instead of just 10 inches) but it’s extremely lightweight at merely 6.6 pounds. That’s light enough for even a child to use this, not that this is meant for children to use. But if you’re small and not all that strong, then this will still be easy for you to carry and move around.

A lot of people who are buying a chainsaw for the first time can be quite annoyed at gas and battery power systems, since those will need gas refilling or battery recharging if the work goes on too long. That’s not an issue with his corded model. Just plug it in, and get to work.

The convenience continues with the instant start, which we’re all used to with our other electrical appliances. This one won’t trouble with the necessity of pulling lots of time to get the engine started. The cord is also 9 feet long, so you don’t have to stand so close to the power outlet.

The manual that comes with the purchase explains how you can adjust the chain tension here, and it’s easy. You don’t even need tools. The automatic oil delivery system also makes sure that your chain is always lubricated, and you just need to keep the oil level up. That’s also easy, as there’s a window that lets you see when it’s time to fill up the oil.

All in all, this is a favorite chainsaw for women, older people, and even older ladies. It’s so lightweight, and there’s no fuel or battery charge to worry about. You get ample power too, and you get that consistently as well. This is comfy to use for everyone, and it’s literally a “plug and play” tool.

Pros
  • Long electrical cord
  • Auto oil delivery
  • Consistent power delivery
  • Convenient oil window
  • Extremely lightweight at 6.6 pounds
  • Immediate start
  • Tool-less chain tension adjustment
Cons
  • Limited to work near power outlets
  • Not for large trees

Oregon CS1500 Self-Sharpening Electric Chainsaw

One of the more annoying problems with chainsaw maintenance is the need to sharpen the blade on a regular basis. In many cases, this is a tedious job requiring a file (usually 5/32-inch). But there’s no need for that with this self-sharpening chainsaw.

That’s because of the built-in PowerSharp Sharpening System, which won’t let you waste time dealing with a dull chain. With this system, all you really need to do is to pull a lever for about 4 seconds or so. After that, the chain is just as sharp as ever.

This is also a 15-amp chainsaw, which means you’re able to work on tougher jobs. It does help that it also comes with an 18-inch bar, which lets you cut thicker trunks and limbs than shorter bars. This can deal with just about any woodcutting task needed for any yard.

Everything’s easy here, starting with the weight at just 12.9 pounds. Given its impressive cutting capabilities, this is quite lightweight. It’s also an electrical model, giving you advantages like instant start, no emissions, and no noise at all. Your neighbors won’t complain about the noise or the noxious fumes, as there are none.

You don’t even have to worry about following the assembly instructions, because the chainsaw is already preassembled. This also comes with safety features like the chain brake.

The weight is nicely balanced, so it’s no trouble moving it around to get your vertical or horizontal cuts. The handle has been engineered for terrific comfort, and you don’t even have to deal with a lot of vibration. The oil delivery system is also automatic, with a window to tell you when you need to fill up the oil tank.

All in all, this is an extremely useful chainsaw that minimizes all the annoying things you have to deal with other models. Problems like noise, noxious fumes, delayed starts with lots of pulls, limited work capacity due to gas tank or battery chargers, complicated assembly, and the need to sharpen the saw blades are problems for other people. They won’t be your problems with the Oregon CS1500

Pros
  • Instant start
  • No assembly required
  • Silent between cuts
  • No emissions
  • Lightweight
  • Minimal vibration
  • Auto oil delivery
Cons
  • Electrical cord may pull out of the outlet easily

Poulan Pro PR4016, 16 in. 40cc 2-Cycle Gas Chainsaw

This was designed to deal efficient with cutting tree limbs and firewood in your yard. That’s why it’s lightweight at just 13 pounds, but you still get enough cutting power with the saw and the 16-inch bar length.

This is an affordable gas-powered model, and for its price it’s terrific. Your purchase also includes the required 2-stroke oil and the nifty scrench. This scrench basically does the job of 2 wrench sockets and a screwdriver, and you’ll need it to maintain the PR4016 properly. You even have onboard storage for this.

This is probably a lot more fuel-efficient than other gas chainsaws out there, due to the fantastic Poulan Pro OxyPower tech. This technology increases the fuel efficiency, as you get more power but with 20% lower fuel consumption and even 70% less emissions.

It also helps that it features the “SuperClean” air filter system, which extends the lifespan of the air filter while it also reduces fuel consumption.

Starting the motor can be a problem with gas chainsaws, but Poulan Pro also thought about that. Their EPS (Effortless Pull Starting) system combines a spring-assist pull cord with a purge bulb that’s easy to use. That gives you a simpler start, with much fewer pulls needed.

Once you’ve started the motor, you’ll find this a joy to use. It has ample power for even medium-duty tasks. It’s comfortable to hold and move around, while the controls are easily accessible. There isn’t much vibration going through the handle, so you won’t get tired too quickly. The oil delivery system is automatic as well.

Sometimes the machine may turn itself off regularly, but you only need to adjust the carburetor to fix this. This is an easy fix, needing just a screwdriver.

More complicated is the required fuel and oil mix, but you get the directions in the manual. Basically, you need a gallon of gasoline mixed with the 2.6 ounces of the full synthetic 2-Cycle Oil that comes with the chainsaw.

You probably have low expectations from this model, especially with the price. But it starts instantly and delivers the promised performance. It will also last for quite a while, as long as you take care of it properly.

Pros
  • Extremely affordable
  • Fuel efficient
  • Comes with helpful scrench tool
  • Easy start (usually a single pull will do)
  • Enough power for medium-duty cutting tasks
  • Lightweight and easy to move around
  • Very little vibration
  • Auto oil delivery
Cons
  • Carburetor may need adjustment
  • Fuel and oil have to be mixed just right

Greenworks G-MAX 40V 16-Inch Cordless Chainsaw, 4AH Battery and a Charger Included 20312

This kit comes with a terrific battery system, which gives you ample power. You can even do up to a hundred cuts on 4×4 lumber with a single charge, so you’re not limited to small wood cutting tasks around the yard. You get a longer operating time frame (about 80% longer), with greater power and torque (about 30% more).

Basically, the brushless motor system here gives you about the same level of performance you’d get from a gas chainsaw. It’s just that you don’t have to bother with using the right fuel, and there’s no noise and no toxic fumes to worry about. You’re not limited by the length of the electrical cord, either.

With the heavy duty 16-inch Oregon bar and chain, you can cut down thicker tree limbs than what you can deal with using other battery-powered chainsaws. It’s not all that tiring, either, as the design reduces the vibrations by 70%.

The metal bucking spikes work nicely, and you also get the chain designed for lower kickback potential. The electronic chain brake also prevents accidental kickbacks. The oil delivery system is automatic, and the translucent oil tank tells you when you need an oil refill.

Pros
  • Lightweight
  • Very safe to use
  • Minimized vibrations
  • Efficient battery power with greater torque
  • Auto oil delivery with translucent oil tank
  • Can last for years
Cons
  • Not for heavy-duty cutting

What’s the Right Bar Length?

The length of the bar on your chainsaw basically determines the kind of job you can do with that chainsaw. That’s why for super-lightweight chainsaws with short bars, you only use them for tree limbs.

The basic rule is that if you’re dealing with a standing tree, then your bar length has to be longer than the diameter of the tree. So, if you’re using a 16-inch bar length with your chainsaw, that means you can use it for a standing tree that’s 14-inches thick.

You get more leeway with a tree that has already fallen, then you have more leeway. You can use 2 cuts (one from each side of the tree). This time, the rule is that you can deal with a thickness double the bar length, minus a couple of inches.

So, if you have a 16-inch bar, you can deal with fallen trees up to 30 inches in diameter, using 2 cuts.

Here’s a quick and easy guide for the bar length you need:

  •   6 to 8 inches: For clearing brush and pruning tree limbs
  •   10 to 12 inches: For cutting up smaller logs and for removing tree branches
  •   14 inches and above: For splitting firewood, cutting up logs, and cutting down smaller trees

Don’t assume that a larger model can deal with smaller tasks. Using an 18-inch chainsaw may not be the best option for a bush. Usually, you want a clearance of about 2 inches or so. That means you can get an 18-inch chainsaw only if you’re going to work on wood that’s 16 inches in diameter.

Pros and Cons of Various Chainsaw Power Systems

Gas-Powered

This is the most powerful option, with the fastest cutting rates. A full tank also gets a large job done. These things are quite rugged, and repairs are often simple.

On the other hand, this is also comparatively heavy, very loud, and produces noxious fumes. You’ll have to mix the fuel and oil just right, plus the pull-cord start can be very frustrating.

Electric

This doesn’t give you as much power as the gas models, but this time there’s no time limit or fuel tank limit to worry about. You have a push button start, and you don’t have to deal with noise and toxic fumes. These are often the most affordable models, and the lightest in weight.

However, you are limited by the length of your extension cord, which you’ll have to deal with as you work. You also have to take care of the chainsaw diligently. If you need repairs, you’ll need a professional to do them.

Battery

These use rechargeable batteries. That means no noise, no emissions, and no issues with the cord length. You also get a push-button start.

On the other hand, these are generally the heaviest and most expensive among your options. You also have to deal with the long recharging time and the very short operating time frame. You don’t really get a lot of power at all, so this only works for light-duty cutting tasks. If you need repairs, you’ll also need a pro.

Conclusion

Who says chainsaws need to be heavy, cumbersome, and expensive? For most of us who needs to just deal with brush and small trees around the house, the best lightweight chainsaws offer the ideal DIY solution. These things are easy to carry and move around, and they’re inexpensive as well.

You just need to make sure that they get the job done, despite the compact size. Pick from our list, and you can be sure you get the best lightweight chainsaw you can rely on for years.

9 Best Chainsaw Bar Oil in 2021- Expert’s Guide & Reviews

If you own and use a chainsaw, then you know that you have to maintain and use it properly. Part of your responsibilities as a chainsaw owner and user is to regularly use the best chainsaw bar oil you can get for your tool.

As you certainly would have noticed, a chainsaw comes with lots of moving parts. The chainsaw bar oil lubricates these moving parts to let them move more smoothly. Consequently, this lessens the wear and tear on the tool.

In addition, the chainsaw bar oil helps the metal parts of the chainsaw resist corrosion. Even if you don’t use the chainsaw in the rain, tree sap can still cause your chainsaw metal parts to rust.

Best Chainsaw Bar Oil Comparison Table

Product Picture

Chainsaw Bar Oil

Size and Quantity

Price

Husqvarna 610000023

1-quart, 2-pack

Echo 6450002

6-pack, 2 gallons

Poulan Pro 952030203

1 quart


Oregon 54-059

1 gallon

Stihl 0781 516 5003

1 quart

Maxpower 337045

1 gallon

Makita 181116-A

1 gallon

Chain-Guard Chainsaw Chain & Bar Oil

1 quart

Arnold Bar and Chain Oil Lubricant

20 ounces

Top 9 Best Chainsaw Bar Oil Reviews

Instead of just picking any random chainsaw bar oil (or worse, just any type of oil), start with any of the options on our list of the best chainsaw bar oils.

Husqvarna 610000023 Bar & Chain Oil, Quart (2 Pack)

Just about every chainsaw owner who has tried this chainsaw bar and chain oil inly has good things to say about it. This isn’t just for the chainsaws that come from the Husqvarna factories. The Husqvarna chainsaw bar oil is for all chainsaws, regardless of the brand. It works well for all types of chainsaws, whether they’re powered by electricity or gas.

This is a chainsaw bar oil that you can use the entire year, regardless of the season or the weather. It maintains its viscosity even in the height of summer, so that it still minimizes the wear and tear on your chainsaw parts. It’s nice and tacky, so it sticks to the chainsaw parts instead of flinging off too easily when you’re using the chainsaw.

Sure, this may be a bit more expensive than your standard chainsaw bar oil. But unlike cheaper (and inferior) chainsaw bar oils, this doesn’t become gritty and gummy.

For all these reasons, we recommend the 2-pack of the Husqvarna bar and chain oil. We’re pretty sure that when you’re done with the first quart, you’ll be happy enough to get to the second one. You won’t really think about switching to another chainsaw bar oil, even if the season changes.

Pros
  • Works for all seasons
  • Works for all brands and types of chainsaws
  • Flows smoothly
  • Nicely tacky
Cons
  • A bot more expensive
  • A handful of buyers have complained about the broken lids during the delivery

Echo 6450002 PK6 2 Gallon Power Blend Oil Mix (50:1)

Okay, this is a surprising addition to this list, because it’s not really designed for your chainsaw bar. It’s meant to be used for a 2-stroke engine. More specifically, it’s designed for use in Echo chainsaws, which use 2-stroke engines.

Actually, it works for a lot of Echo machines, such as Echo leaf blowers. It’s probably the best option for your Echo engine, as it prevents expensive engine failures that may result from using cheaper alternative engine oils. In fact, some dealers insist that the warranty on the Echo chainsaws only works if you use this particular oil.

It’s a bother to use, though, since you have to mix this yourself. You get 5.2 ounces per bottle, which you’ll need to mix with gas (50:1 mix) so you end up with gallons of the oil and gas mixture.

Sure, you can use this for other chainsaws, but only if there’s no other recourse. But this is best for your Echo chainsaws and other motorized tools.

Pros
  • Works terrifically with Echo chainsaws
  • Actually, it works well with any Echo tool with a 2-stroke engine
  • Extremely affordable
Cons
  • Only good for Echo machines
  • Has to be mixed before use

Poulan Pro 952030203 Bar and Chain Oil - 1 Quart

Okay, we’re back to our regular programming, with a proper bar and chain oil. This is also specifically designed to work for the bar and chain like the Husqvarna oil. However, this is much more affordable compared to the Husqvarna oil.

Just because it’s cheap doesn’t mean the quality is cheap as well. It’s actually quite effective, especially in the summer. It offers terrific viscosity right out of the bottle. It’s also very tacky, which minimizes the throw-off for the oil. It really sticks to the chainsaw bar and chain. You won’t have to keep putting in more oil to keep your chainsaw happy.

However, this may not be the best option when winter comes. Sure, it still works. But during the winter, you may want to switch to thinner oil.

Pros
  • Extremely affordable
  • Just as effective as more expensive chainsaw bar oils
  • Works nicely during the summer
  • Enough tackiness to minimize throw-off
Cons
  • Not the best choice when winter comes

Oregon 54-059 Bar and Chain Lube, Black, 1 Gallon

This is another universal chainsaw bar oil. That’s to say, it’s meant for use for all brands of chainsaws, and you can use it for any season.

However, when we tried it out, we found that it’s noticeably thinner than many of the other chainsaw bar oils. This isn’t always a bad thing, though this may not be your best option for your high-powered gas chainsaws. This is just too thin for those types of chainsaws.

But this may be ideal if you use a cordless chainsaw. As you probably may have noticed, cordless chainsaws tend to have reduced power. So, you don’t really want oil that’s too thick for these chainsaws. Instead, the thinner oil from Oregon is a much better option. The thinner oil works out nicely with the reduced power of the cordless chainsaws.

Though the oil is thinner, it also adheres to the bar nicely. That means you won’t have as much throw-off as you might have expected. You won’t have to keep putting in more oil just because the chainsaw keeps slinging off the oil.

Pros
  • Great price
  • Ideal match for cordless chainsaw
  • Sticky for minimal throw-off
Cons
  • May be too thin for gas-powered chainsaws

Stihl 0781 516 5003 Platinum Bar and Chain Lubricant, 1 Quart

There’s really no such thing as a perfect chainsaw bar oil, though you can say that for just about any consumer item. Even the excellent Stihl Platinum bar and chain lubricant has garnered a lot of complaints.

However, these complaints aren’t about the performance of the product at all. Instead, they’re virtually all about the exorbitant price. A lot of people say that they’d rather go with another chainsaw bar oil, which may be only slightly inferior but a lot more affordable. Just like platinum wristwatches tend to be more expensive (even more expensive than gold), this Platinum oil from Stihl is simply astronomically priced.

But there’s really no denying the fact that you may find it impossible to find another chainsaw bar oil that performs better than the Stihl Platinum. It’s simply magnificent for its purpose. It’s extremely effective, and you may notice that your chainsaw works a lot better once you’ve put in this oil.

What’s more, it’s a very sturdy oil. The summer heat may thin your oil out (which is why you generally want thicker oil during the summer), but you won’t notice it with the Stihl Platinum. It simply works, and it makes your chainsaw work a lot better too.

It’s also very sticky, which minimizes the throw-off nicely. However, you may want to keep from applying too much of the oil to your chainsaw bar and chain. If you put in more oil than necessary, the sticky oil may just attract sawdust and even dust particles that may gum up the works.

Pros
  • Makes your chainsaw work a lot better
  • You don’t need to apply it too frequently
  • It doesn’t thin out even during the summer
Cons
  • Extremely expensive
  • You have to be careful you don’t put in too much of it

Maxpower 337045 1-Gallon Bar and Chain Oil, Black

In this day and age, a lot of people are suspicious of synthetic materials for one reason or another. This makes the Maxpower 337045 a fantastic option if you think this way, because it’s made from 100% virgin oil.

However, the popularity of the Maxpower 337045 is due to a much simpler reason: it’s just so effective. This oil flows nicely to keep your chainsaw running smoothly. In fact, its blend even contains additives that somehow improves the chainsaw’s resistance to wear and tear. That means your chain and the blade can last longer because of the oil.

This also sticks to the chain nicely, instead of just flinging off easily. This tacky nature means you won’t have to keep putting in new oil to replace the dislodged oil.

You may notice, however, that the Maxpower 337045 seems a bit thinner than your usual chainsaw bar oil. That’s not really a big deal, especially when you notice how well your chainsaw performs with this oil. Everything runs smoothly, and chain stutter won’t be a problem anymore.

It’s just that you may find that you’re lubricating a bit more frequently than what you’d expect with other chainsaw bar oils. This is the reason we opted for the 1-gallon container instead of the usual 1-quart. That gallon should last you a good long while, and it’s not as if it’s too expensive!

Pros
  • Available in larger gallon container
  • The price is right
  • Keeps the chainsaw running nice and smooth
  • Contains additives for greater resistance to wear and tear
Cons
  • May be a bit too thin, leading to more frequent oil refills
  • May be too thin for powerful gas-powered chainsaws

Makita 181116-A Bar and Chain Oil, 1 Gallon

The Makita bar and chain oil is also available in 1-quart containers. But we went with the 1-gallon option, because we found it a bargain. You need the best bargain you can get, because this is the main problem with the Makita oil—it’s expensive.

Sure, the price is really not all that huge, compared to your expenses if you use oil that doesn’t actually work. But it all adds up over the months and years.

Still, you can’t really complain at all about the performance of the oil. Some people pay the price because the quality and effectiveness of his bar and chain oil will really set your mind at ease. It lubricates everything properly, and your chainsaw works smoothly as a result.

The oil also sticks very well to the chain bar, so that you don’t fling a lot of it while you’re using the chainsaw. However, some may find the viscosity a bit too thick. This may be a problem for low-powered cordless chainsaws that don’t have enough rpm.

You can still solve that problem easily enough by putting in some thinning agent into the mix, though. All in all, this works—except it may not be the best for those who are on a more limited budget.

Pros
  • Doesn’t thin out during the summer
  • Keeps the chainsaw running perfectly
  • Sticks to the chainsaw nicely
Cons
  • Expensive
  • May be too thick for underpowered chainsaws

Chain-Guard Chainsaw Chain & Bar Oil

If you have an expensive chainsaw (assuming there’s such a thing as a “cheap” chainsaw, of course), then you don’t want to waste your money by not taking care of it properly. That means spending a bit more money for your chainsaw bar and chain oil. That’s especially true when you use your expensive, high-powered chainsaw on an almost daily basis.

But what if you only have a comparatively affordable chainsaw, without too much power? You may have bought it for some odd jobs here and there. You may not use it often, and only for cutting very thin branches every now and then. In that case, it doesn’t really make sense to spend too much on your oil.

That’s when the Chain-Guard oil comes in. This is extremely affordable. Everyone can afford this.

That’s mainly because it’s a bit too thin. It’s not really meant for the summer season when the heat thins it out even more.

It’s not also the best option for high-powered chainsaws, since you’ll just have to keep putting new oil on the chainsaw. That doesn’t save you money at all.

But if you have a cheap chainsaw, then this is the cheap chain and bar oil for you. It’s thin, but then you don’t really need thick oil for your underpowered chainsaw. You won’t even have to oil the chainsaw anyway, if you rarely use it. This is the most cost-effective option for the owners of cheap chainsaws that rarely get used.

Pros
  • Extremely affordable
  • Nice and thin for underpowered chainsaws
  • Easy to apply
Cons
  • May not be right for chainsaws that are used regularly
  • Not ideal for powerful chainsaws

Arnold 20 oz. Bar and Chain Oil Lubricant

This is another extremely affordable chainsaw bar oil. It’s great if you don’t use your chainsaw that often, since this is cheap for a reason.

That reason is that this oil is noticeably thin. In fact, if it didn’t specify that this is a bar and chain lubricant, we’d have thought that this was motor oil. The throw-off factor is huge, so you’ll have to keep putting in more oil to keep the chainsaw lubricated.

What this really means is that this is ideal only for those who don’t really use their chainsaws often. If you only use your chainsaw every now and then, and only for a few thin tree limbs at a time, this will suffice. For those instances, you don’t need to spend a lot more.

Pros
  • Super-cheap
  • Oil flows freely
  • Great for occasional chainsaw use
Cons
  • Very thin
  • Chainsaw doesn’t stay lubricated for long

FAQs

Q: My grandfather used motor oil as his chainsaw bar oil. Why can’t I do the same?

A: That’s because today, you have better options. Motor oil doesn’t really stick, so it gets flung around. The chainsaw doesn’t stay lubricated at all.

Q: How do I put in the chainsaw bar oil?

  1. Turn the chainsaw off, and unplug it if it’s a corded model.
  2. Place the tank on a flat surface.
  3. Take off the tank cap, and pour in the oil.
  4. Don’t put in too much that you overfill the tank.
  5. Screw in the cover securely.
  6. If you spill some oil, wipe it down.

Q: Can I put in oil while the chainsaw is running?

A: Technically, you can. But you shouldn’t, because it’s just too darn dangerous. Why take the risk?

Q: Can I use vegetable oil?

A: You can, for emergencies. But a real chainsaw bar oil is much better. Vegetable oil also doesn’t seem to work well in some types of seasons.

Q: Can I use brake fluid?

A: Some people have found that this works, in a pinch. It’s just that the brake fluid dries up a lot more quickly, so you’ll have to put in more brake fluid more often.

Q: How often should I refill the oil?

A: That depends on a lot of factors—how often you use the chainsaw, what types of cutting jobs you do, and the overall quality of the chainsaw bar oil. Use the oil as often as you need it.

Q: How long does the oil last?

A: Again, that depends on how you use the chainsaw. If you’re talking about the oil on the chainsaw after you’re done using it, you can expect it to last for a month. After that, the oil may no longer be as consistent so it’s a better idea to just put in new oil.

As for the oil you have in storage, that can last a good long while if you have a secure container. Just give it a nice shake before you use it.

Q: How come the chainsaw doesn’t perform better when I put in new oil?

That’s because the oil isn’t magic. It’s not the only thing that’s affecting the performance of your chainsaw.

Q: Are you using an underpowered chainsaw?

If you are, then the oil won’t make it more powerful.

Q: Are you using a battery-powered chainsaw?

The battery power may be running out, and you may need a recharge.

Or perhaps you’ve been using the blades for too long without sharpening them. You may find that sharpening the blades may give you the performance boost you were looking for.

Conclusion

It’s not really true that you can use any oil (such as motor oil) as your chainsaw bar oil. That’s because they may not have the right viscosity. Oil that’s too thick may simply impair the ability of the chainsaw parts to move. On the other hand, if the oil is too thin then you’ll have to put in more oil more frequently.

You also have to take the tackiness of the oil into account. If the oil doesn’t stick to the chainsaw properly, then you’ll just sling off the oil. Then you’d have to put in more oil again.

It’s best if you stick to a true chainsaw bar oil, which has been designed for this very purpose. Better yet, stick to any of the chainsaw bar oil on our list. Feel free to try them all out, and see for yourself which one will work best for your chainsaw.

Keep in mind that your chainsaw is just like any machine—it requires proper maintenance. If you don’t want your chainsaw to wear out too quickly, then you absolutely need the best chainsaw bar oil you can get.

Best Chainsaw Chaps 2021 – The Top Rated Safety Pants

Best chainsaw Chaps

Even if you haven’t watched the movie The Texas Chainsaw Massacre, it’s pretty easy to realize that a chainsaw is just that dangerous to use. After all, you’ve got dozens of small blades rotating fast at a rate of several thousand times a minute. What if you accidentally drop that chainsaw you’re holding on your legs? It’s that distinct possibility that requires you to wear chaps over your jeans when you’re using a chainsaw.

These things also protect you from thorns and other outdoor hazards, in case you’re working in the bush. Also, they protect you from flying debris from the fast-spinning chainsaw.

Unfortunately, not all chainsaw chaps are created equal. The best chainsaw chaps must offer adequate protection, while still permitting you to move around comfortably. To make sure that they actually can protect you, you should check that the chainsaw chaps comply with industry safety standards.

It would also be great if they look nice—no one wants to look goofy while working with a chainsaw. Of course, they also should come with a reasonable price tag.

With all those factors in mind, we’ve compiled a list of the best chainsaw chaps that are absolutely worth your money. Pick any of the chainsaw chaps on our list, if you work with a handheld chainsaw even infrequently.

Best Chainsaw Chaps Comparison Table

Product Picture

Chainsaw Chaps

Standards Compliance

Available Sizes

Price

Husqvarna 587160704

UL certified, ASTM f1897, ANSI z133.1, and OSHA regulation 1910-266

36 to 42 inches (length)

Stihl chainsaw chaps

OSHA Regulation 1910.266

30 to 42 inches (waist)

Forester Chainsaw Apron Chaps with Pocket

ASTM F1897, OSHA 1910.266, UL Certified

28"-44" (waistline)


Husqvarna Technical Apron Wrap Chap

ASTM F1897, ANSI Z133.1 and OSHA Regulation 1910-266

36 to 42 inches (length)

Oregon Protective Chainsaw Chaps

UL Certified, ASTM F1414 Test Method and ASTM Specification F1897

Up to 46 inches (waistline)

LABONVILLE Premium Chainsaw Chaps

OSHA Regulation 1910-266, ASTM F1897-14, ANSI Z133.1

Up to 48 inches waist

Arborwear Men’s Apron Style Chainsaw Chaps

CAN/BNQ 1923-450-M91 3XF3, ASTM F1897-2014 3XF3

Up to 48 inches waist

Portwest Workwear Men’s Chainsaw Trousers

CE-certified

Small to XXL

Pfanner Gladiator Extreme Chainsaw Protection Pants

CE-certified

33 to 41 inches waist

WoodlandPro Chainsaw Safety Chaps

ASTM F1414-13, BNQ/CUL Certified for Class B Standards 1923-450-M91, ASTM F1897-2008, OSHA Regulation 1910-266, ANSI Z133.1 2012

28 to 44 inches waist

Top 10 Best Chainsaw Chaps Reviews

Husqvarna 587160704 Technical Apron Wrap Chap, 36 to 38-Inch

We went with the smaller version, though there’s a longer version to goes up to 42 inches in length. We also chose the orange/gray color combo, thinking that we wanted to be highly visible in a workplace where people are using chainsaws. The waist is adjustable, and it features acetyl Delran buckles.

These protective chaps use 1000-denier polyester, topped with PVC coating and Tek warp protective layers. It protects you from cuts, because it’s meant to pull apart rather quickly when it comes into contact with a spinning chainsaw. The material quickly clogs up the chainsaw sprocket system to stop (or at least slow down) the spinning of the chainsaw.

It’s been known to work, with users in accidents testifying that the chainsaw didn’t even leave a bruise on them. These chaps meet the standard safety regulations ASTM f1897, ANSI z133.1, and OSHA regulation 1910-266.

They’re rather useful even when everything’s working fine, as they have convenient pockets for your various tools. You can even wash them with cold water.

Pros
  • Meets ANSI and OSHA regulations
  • Uses 1,000-denier polyester with Tek warp layers and PVC coating
  • The material is meant to pull apart and stop the chainsaw from spinning
  • Comes with handy pockets
  • Reflective leg bands
Cons
  • Warm to wear on summer days
  • Confusing sizing description

Stihl Chain Saw Protective Chaps

Here everything is orange, though there’s a navy-blue color option. You can also get lengths of 32, 36, or 40 inches.

Of course, it’s more important to note that it’s UL-certified as a chainsaw cut-resistant leg protection when using gas-powered chainsaws. It meets the ASTM F1414 Test Method and ASTM F1897 performance standard.

This is a set of apron-style chaps, which is quite comfy to wear while it’s still rugged enough for outdoor chainsaw use. It uses a cut-retardant material with 9 layers of Avertic Pro by Engtex sewn-in, along with a nylon covering that’s resistant to water and oil.

It’s easy enough to put this on, and it’s adjustable to suit a range of sizes. The waist can set comfortably on sizes ranging from 30 to 42 inches. You can even get a waist extender separately if your waistline is still bigger. Once you’ve got this on, the chap protects down to below your calf.

This comes with an open back, so it’s not quite as warm as you may have feared.  The waistband is also reflective, just to make sure that everyone can see where you are. You’ve also got a huge pocket where you can put your other tools or even your smartphone.

Pros
  • 9-ply protection
  • Materials are designed to stop the chainsaw from spinning
  • Meets safety standards
  • Easy to put on
  • Open-back design
  • Resistant to oil and water
Cons
  • There may be some sizing confusion

Forester Chainsaw Apron Chaps with Pocket, Orange 37 Length with Adjustable Belt

This is available in 3 sizes. Get the short if your height is between 5 feet to 5 feet, 4 inches. If you’re 5’4″ to 6′, go with the regular. If you’re 6′ to 6’4″, the long version is your best option.

These come in 9 different color combinations, and we really recommend that you pick the more visible options like the safety green. For some reason, there are even camo options that let you blend in among the trees. Maybe you’d want to use these things for protection in air gun mock battles, but you don’t want to be invisible with chainsaws in operation.

Despite some of the more bewildering color options, these things do work when it comes to protection. These chaps are UL-certified, meeting both ASTM and OSHA standards. They’re in the apron style, meaning they’re meant to protect the front of your legs.

The protection you get is extremely tough, starting with the 1.200-denier oxford shell. Then you have 12 layers of Kevlar fiber protection. The Kevlar fiber gets into the chain to stop it from spinning. It’s even resistant to water and oil, plus it features a large 6×6-inch pocket for various tools.

Lots of people have reported that these chaps have saved them. Just make sure that when it does get into contact with the chainsaw to protect you, you ought to replace them afterwards.

Pros
  • Lots of color options
  • Complies with industry safety standards
  • Extremely tough with lots of Kevlar layers
  • Comes with a pocket
  • Very affordable
Cons
  • Some of the colors aren’t good for visibility (like the camo)
  • They may hang a bit too loosely

Husqvarna Technical Apron Wrap Chap, 40 to 42-Inch

We got the biggest one this time, since it’s not surprising that a lot of chainsaw users tend to be bigger as well. The waistline does extend up to 42 inches, which is a good thing for most of us.

The fit is good, and there’s also a convenient pocket her you can use on your left side for various tools and accessories. This protects the front of your legs all the way down to the top of your shoes, and it also protects the back of the legs down from the knees. You’ve got 3 straps there to make sure they stay in place.

The protective shielding is quite good, even if you don’t really want to test it firsthand. You’ve got 1,000-denier polyester with the Tek Warp layers, along with the PVC coating. The pad will get itself pulled apart upon contact with the chainsaw, thereby stopping its spinning. It also gives you enough of a reaction time to get the chainsaw off your legs.

Maintenance isn’t really much of a problem, as you can use cold water to wash it. The main problem is once again the sizing, which can be rather confusing. It’s also a bit warm to wear during the summer, but then again that’s a common problem with these chaps.

Pros
  • Meets ANSI and OSHA regulations
  • Uses 1,000-denier polyester with Tek warp layers and PVC coating
  • The material is meant to pull apart and stop the chainsaw from spinning
  • Comes with handy pockets
  • Reflective leg bands
Cons
  • Warm to wear on summer days
  • Confusing sizing description

Oregon Protective Chainsaw Chaps, Adjustable Up to 46"

This is great for a lot of users, since we all have to admit that our waistlines are expanding. So, it’s nice that this one can still fit comfortably even when we have a bit of a tummy.

This is one of the more comfortable options when it comes to chainsaw chaps, and it’s your best option if you find the other chaps toot unbearable to wear. The waist and the length are all adjustable, and it leaves the back of your legs uncovered. The protective layers are also breathable, so they don’t feel as warm as the other chaps.

This uses a 600-denier oxford shell for protection, which may not seem as formidable as the 1,000-denier protection from other chaps. But then you also get 8 layers of the breathable warp knit fabric. These fabrics will bind with the chain up contact, so that the chainsaw stops spinning.

This still gets the UL-certification, and classified as a proper cut-resistant chainsaw leg protection for gas-powered chainsaws. It complies with the ASTM (American Society of Testing & Materials) F1414 Test Method and the ASTM Specification F1897.

Maintenance is also easy, and you don’t even need to wash this by hand. It’s machine-washable.

Pros
  • Nice and breathable
  • Adjustable waist and length
  • Not that heavy
  • Interlocking leg buckles keep it in place
  • Stops chainsaw from spinning
Cons
  • Lower denier level
  • Only available in black, which isn’t really highly visible

LABONVILLE Premium Chainsaw Chaps - Overall Length 32" - Made in USA – Orange

Yes, there’s also a 36-inch version and a 40-inch version too. We tried the smallest one, to see if maybe its smaller size means it offers less protection. Thankfully, that’s not true.

You still get the 5 layers of a special blend that combines polyester and Kevlar. You still get the tough 1,000-denier nylon cordura, which even has a coating of extra-HD urethane. This cordura material even passes the CS-191-53 flame resistance standard.

This works the usual way—the fabric gets caught in the chain and stops it from spinning and mangling your legs. It meets various industry standards, including the OSHA Regulation 1910-266, ASTM F1897-14, and ANSI Z133.1 Standards.

This is very comfy to wear, and it’s even reversible. The small size is great, even for small ladies who use chainsaws.

Maintenance can be a bother, though. You need to wash this by hand, and you can’t use any detergent with chlorine bleach.

You have to keep this oil-free, and to do that you need non-chlorine bleach solvent. After that, you’ll have to use detergent and water, then sue a bristle brush. You finish the cleaning by rinsing with warm water, then you hang it up to dry.

You need to do all this, because you don’t want to ruin the chaps. These are rather expensive, so you may as well take care of it properly.

Pros
  • Comfortable to wear
  • Can accommodate larger waistlines even for short lengths
  • Still offers proper protection
  • It’s even flame-retardant
Cons
  • A bit expensive
  • A bit fussy with its maintenance needs

Arborwear Men’s Apron Style Chainsaw Chaps

This works very well, and it comes with a long list of certifications to make sure you know it. You have 6 layers of blocking material, with heavy-duty nylon on the outside. This even comes with PU coating and durable water repellant (DWR) so that your trousers don’t get wet.

The apron-style design here offers 180-degree protection for the whole front side of your legs. In fact, the wraparound pads even face somewhat to the left, to account for the natural direction of the chainsaw. The heavy-duty buckles here are also designed to deal with the cold and stress.

Don’t worry if you have a larger waistline (don’t we all?), since the waist belt can fit up to 48 inches of waistline. The waist belt can stretch, and it’s adjustable. In fact, this features a special strap system that gives you a customized fit. The straps and buckles can even be replaced if they wear down.

All in all, this offers a very comfortable fit along with protection you can trust. It’s also meant to last for a long while. They’re even machine-washable. Perhaps the only annoying thing here (at least at first) is that it takes time to undo all these straps when you take off the chaps, and it also takes time to adjust them when you wear the chaps.

Pros
  • Conforms to industry safety standards
  • Extremely comfortable due to customized fit
  • Can accommodate larger waistlines
  • Machine-washable
  • Replaceable straps
Cons
  • Straps take time to adjust

Portwest Workwear Men’s Chainsaw Trousers

These aren’t really the chaps you wear over your trousers. Instead, these are actually trousers, so you don’t need to wear jeans underneath.

This does mean your legs are protected 360-degrees, and it’s also CE-certified. It even comes with UPF 50+ protection, meaning it only allows 1/50 of the UV radiation to pass through.

It also offers an elastic waist, plus you get 5 pockets. One of these pockets is even designed for your smartphone. With the black color and orange highlights, you’re highly visible as well.

Pros
  • Offers terrific protection
  • Minimizes UV rays
  • 5 pockets
  • Elastic waist
Cons
  • Feels really warm, especially for summer use
  • Feels heavy too

Pfanner Gladiator Extreme Chainsaw Protection Pants

Now this thing is one of the most expensive options on this list. For one thing, this gives you a pair of pants instead of chaps. It uses a combination of protective materials to protect your legs from the chainsaw. This really acts like a shield, and it won’t tear. The outer fabric repels water, oil, and even heat (or the cold). You’re also protected from thorns.

It’s actually quite comfy to wear, despite the fact that you get 360-degree coverage. The back of the legs has zippered vents, for extra cooling. The special fabric keeps out the extreme heat (and extreme cold). The special stretch technology also gives you a more comfortable fit.

Pros
  • Protects from chainsaws
  • Also resistant to oil, water, and thorns
  • Won’t tear
  • Vents at the back
  • Stretches for a better fit
Cons
  • Extremely expensive
  • May be a bit warm for summer use

WoodlandPro Chainsaw Safety Chaps

Let’s first start off with the safety certifications, since there are a lot of them:

  •   UL Certified in Accordance with ASTM F1414-13
  •   BNQ/CUL Certified for Class B Standards 1923-450-M91
  •   ASTM F1897-2008 Leg Protection for Chain Saw Users
  •   OSHA Regulation 1910-266 for Logging Operations
  •   ANSI Z133.1 2012 Standards for Tree Care Operations

We begin with these assurances because this doesn’t really look impressive at first. The protective pad measures anywhere from 28 to 36 inches long, depending on the size you get. You basically wear this like a belt, as it fits waist sizes from 28 to 44 inches. Then you have 1-inch adjustable leg straps with quick fasteners.

These chaps are effective, thanks to the super-tough 1,000-denier ultra-nylon blaze-orange covering. It’s reinforced with 2 layers of Kevlar, and then another 2 layers of polyester felt for the pad.

This has been around since the 1980s, and it has protected quite a few people from horrendous injuries when they’ve accidentally dropped their chainsaws on their thighs. Wear them, and you also protect your jeans from various nicks and splattered oils from the chainsaw.

These are very affordable as well, and they’re also easy enough to put on and take off. Maybe they’re a bit warn for summer use, but you can live with that easily. At least you know you’re getting proper protection for yourself in case the worst happens.

Pros
  • Affordable
  • Easy to put on and take off
  • Meets lots of safety regulations
  • Comfy to wear and move around in
Cons
  • Maybe a bit warm during the summer

Why Doesn’t a Chainsaw Chap Work Against Electric Chainsaws?

You may have noticed that for many of these chainsaw chaps, there’s a warning that they don’t work as well with electric chainsaws. They only work against gas-powered chainsaws.

The main reason for this is due to the power consistency difference between these 2 types. With a gas-powered chainsaw, the chain power pulses. That is, there’s an intake stroke and then a power stroke, alternating while it cuts.

These chaps are designed to be pulled apart, so that they gummy up the works of the gas-powered chainsaw during the intake stroke. That stops the spinning of the chainsaw.

However, with the electric chainsaw the power is consistent. The torque remains high, even when it comes into contact with your chaps. So, it will destroy your protective shield, and then keep on running to mangle your leg if you’re unable to get the chainsaw off.

Conclusion

With the best chainsaw chaps, you have to balance the need for protection with your desire to be comfortable. A lot of people don’t wear them because they can be ill-fitting, too heavy, or just too warm. But these are small problems, compared to the serious injuries you’d get from a chainsaw accident while you’re not wearing these chaps and trousers.

So, do yourself a favor and wear the best chainsaw chaps you can get. Pick one from our list, and you’ll satisfy your need for protection and your need for comfort as well.

Best Chainsaw Helmets in 2021 – To Keep Your Head Safe

Best Chainsaw helmet

With some people, chainsaw protective gear seems to include only gloves, goggles for the eyes, and maybe some earmuffs to protect against the chainsaw motor noise. But what about using helmets? They’re actually crucial for your safety as well. In fact, the best chainsaw helmets will already come with other important safety accessories that can protect you in case of chainsaw accidents.

It may seem like overkill to wear a helmet on top of all the other protective gear you have, but a helmet will really help. Of course, it all depends on the particular helmet you get. The best chainsaw helmets aren’t just effective in protecting you from potential harm. They’re also comfortable to use.

That leads to the obvious question: exactly which chainsaw helmets are the best? We have the answers to that question, as we’ve compiled the best chainsaw helmets that are absolutely worth your money.

Best Chainsaw Helmets Comparison Table

Product Picture

Product Name

Mesh Screen

Plastic Visor

Earmuffs

Price

Husqvarna ProForest Chain Saw Helmet System

Yes

No

Yes

TR Industrial TR88011 Hard Hat Forestry Safety Helmet & Ear Muffs

Yes

Yes

Yes

Oregon 563474 Chainsaw Safety Protective Helmet with Visor Combo Set, Yellow

Yes

No

Yes

NoCry 6-in-1 Industrial Forestry Safety Helmet and Hearing Protection System with Two Protective Visors

Yes

Yes

Yes

Felled Forestry Safety Helmet – Vented Forestry Hard Hat, Mesh/Plastic Safety Visor, Earmuffs – Chainsaw Helmet System

Yes

Yes

Yes

RK SAFETY Industrial Forestry Chainsaw Safety Helmet Combo Set

Yes

No

Yes

Greenworks Chainsaw Safety Helmet with Earmuffs GWSH0

Yes

No

Yes

Top 7 Best Chainsaw Helmets Reviews

Check out what you get with our recommended chainsaw helmets:

Husqvarna ProForest Chain Saw Helmet System

This is designed to fit the heads of most people, and you also get the adjustable 6-point suspension to help you wear this with the utmost comfort. It looks nice too, with the light orange color for greater visibility.

The hardhat helmet offers better protection for your head in case of falling tree limbs, compared to just wearing a cap. The helmet is strong, but will flex upon impact like the crumple zone on your car. The helmet even gives you protection from UV rays.

This comes with a mesh screen to protect your face, while you also have a rain neck protector attached in case it rains. The 25 dB (A) NRR hearing protectors also muffle the noise, though you may want to add earbuds.

Keep in mind that you have to assemble the pieces together. But it’s not really all that complicated. You get a pamphlet with pictures to tell you how to do it.

A lot of professional loggers really like this particular helmet, because it offers protection even while it is so comfortable to wear. The tightening system on this helmet is a beauty, as it really secures the helmet on your head without making you feel uncomfortable at all.

Pros
  • Extremely comfortable to wear
  • Effective helmet impact absorption
  • Looks great
  • Meets ANSI Z89.1-2003 Class G-E-C standards
Cons
  • Some people have trouble attaching the mesh screen
  • You may need earbuds for additional noise protection

TR Industrial TR88011 Hard Hat Forestry Safety Helmet & Ear Muffs

This one comes with both the mesh metal visor, and the plastic visor as well. You can then pick which one will best suit the job you’re doing. The metal mesh is best for when there’s a chainsaw around, but the plastic visor is great of other tasks.  After all, you can use this for many other tasks, like painting or welding.

The earmuffs are especially nice, as they also come with the high-density sound-absorbing acoustic foam that wraps around your ears. This gives you a 26 dB noise reduction rating, effectively reducing the decibel level by about 9.5 decibels. These earmuffs are adjustable, and they’re even removable in case your chainsaw (or the task you’re doing) isn’t really that noisy.

This is quite lightweight, so it’s not like you’re wearing a motorcycle helmet. There’s even a dial knob that lets you tighten the helmet around your head. The knob lets you set the helmet circumference from 20 inches up to 24.5 inches.

All in all, this offers terrific protection. The entire helmet has a Z89.1-2003 ANSI rating, and all the other individual components also have their own ANSI and CE approval. The helmet looks great too with its red color.

Pros
  • Comes with both mesh metal and plastic visor
  • Earmuffs offer 26dB noise reduction rating
  • Earmuffs are adjustable and removable
  • The helmet fit can be adjusted with a dial knob
  • The helmet also comes with ventilation holes on top
  • CE and ANSI approved
Cons
  • Protection best for weekend warriors, not pros
  • Hard to get replacement parts

Oregon 563474 Chainsaw Safety Protective Helmet with Visor Combo Set, Yellow

The yellow color of this helmet really stands out when you’re in a forest. They’re really more visible than the usual red color you find in some helmets. When someone’s using a chainsaw around you, you really want to be quite visible. And if you’re the one using the chainsaw, you want everyone to see where you are.

The helmet is made from hard plastic, so that it absorbs impact forces quite well. You can even test it—it compresses in your hands and then reverts back to its original shape.

At the same time, you have 6 ventilation on top of the helmet to let your head breathe. This also comes with a 6-point harness around your head, so you can really fit it on your head precisely.

The mesh visor here is made from stainless steel, and it’s quite wide for better protection and vision. It’s still lightweight, and you can also flip it up and down.

Then you have the earmuffs, with a noise reduction rating of 24 decibels. The earmuffs are also adjustable, so you can set it for both comfort and noise reduction.

The helmet does meet the ANSI Z89.1-2009, Type I, Class E, G, and C safety standards, so you know this thing really protects you.

You just need to make sure you assemble the whole thing properly, which may be a bit difficult due to the rather unhelpful picture instructions. It’s actually this part that garners all the criticisms and negative reviews, but you can always do some online research to help you out.

Pros
  • Hard plastic helmet absorbs impact effectively
  • The 6 ventilation holes keep your head cool
  • The 6-point harness system lets you set it comfortably and securely on your head
  • There’s also a set of effective earmuffs
  • The yellow color offers excellent visibility
  • The metal mesh visor works well
Cons
  • May be hard to find a clear visor for this
  • The assembly instructions are rather unclear

NoCry 6-in-1 Industrial Forestry Safety Helmet and Hearing Protection System with Two Protective Visors

As the name says, this is designed for the professional forestry industry. But even if you’re a weekend DIY warrior, this can really help you out when using a chainsaw. It’s extremely lightweight and quite effective in offering protection.

Just how effective is this? Well, the helmet and the various parts all have the Z89.1-2003 ANSI rating, and this is the standard for professional head protection. It’s CE-approved as well.

It all starts with the tough polypropylene hard hat, which weighs 2.1 pounds. This comes with a padded sweatband for your comfort, along with an adjustable 4-point internal headband to let you set it on your head securely. This will fit your head, if it measures anywhere from 54 to 62 cm. That’s a range from 21 and 17/64 inches to 24 and 13/32 inches.

This also comes with the adjustable metal mesh visor and the polycarbonate face shield. Both can flip up, when you want your vision unimpeded (preferably when the chainsaw is off). The screens click cleanly between the up and down positions.

The earmuffs are also quite effective, with a noise reduction rating of almost 26 dB. They work well, and they fit most ears snugly and comfortably. These are adjustable as well, and you can rotate them to the back of the helmet when you need to have your ears uncovered.

As you get both types of visors plus the earmuffs, you barely need anything else when working with a chainsaw. Perhaps the only thing that may annoy you is the need to assemble this yourself, but you can go online and find out how others figured this out. NoCry says that the assembly only takes 5 minutes, but not everyone finds their instructions easy to follow.

Pros
  • The polycarbonate face shield offers wraparound face protection
  • Both screens flip up cleanly
  • The earmuffs can be rotated to the back of the helmet
  • The earmuffs also reduce the noise effectively
  • Nice red color
Cons
  • The various components aren’t easily available separately
  • May be hard to figure out the assembly
  • No ventilation holes

Felled Forestry Safety Helmet – Vented Forestry Hard Hat, Mesh/Plastic Safety Visor, Earmuffs – Chainsaw Helmet System

This one comes in a highly visible bright green color, and it sure looks right in a forest setting. But of course, its color is perhaps the least important aspect. What you first need to know is that it meets both the ANSI Z89.1 and the CE EN397:2012+A1:2012 safety standards.

This is a lightweight helmet, but you still get a tough, high-density, impact-resistant polypropylene shell. The 6-point suspension system offers a nice, comfy fit, with a dial knob to let you do easy circumference adjustments. You also have 6 ventilation holes on top to keep your head from overheating.

This also comes with both the mesh face screen and the clear polycarbonate (PC) visor. The PC visor is also impact-resistant, not like the plastic face screens people use for pandemic protection. It even meets CE EN 166 1B safety standards. Both screens also flip up when you’re not using them.

Then there’s the set of earmuffs. These also conform to the CE EN 352-3 and the ANSI S3.19 standards for acoustical noise reduction. It comes with a 30dB NRR rating, but it is complete free of metal parts to reduce the weight. Instead, you get soft PVC ear cushions that sit comfortably on your ears. The earmuffs also flip up when you’re not using them, or you can just remove them completely.

Unlike other helmets, this one is quite easy to assemble. The directions are actually easy to understand, and it shouldn’t take you more than 5 minutes. Making the adjustments is also fast and simple. It meets various safety standards, so you know it’s effective.

Pros
  • Everything meets safety standards
  • You get both the mesh and clear visor
  • Both face screens can flip up
  • Very effective noise reduction
  • Earmuffs can also flip up
  • Very easy assembly
Cons
  • It’s so lightweight that some may find it too flimsy

RK SAFETY Industrial Forestry Chainsaw Safety Helmet Combo Set

The first thing you’ll probably notice here is the bright yellow color of the helmet. This time, visibility is definitely not an issue. Wear this and everyone will see you.

The helmet does offer excellent protection, as it meets the ANSI Z89.1 Type I EN 397, Class E, G and C standards. It’s a proper hardhat that offers excellent impact resistance, and it even gives you protection from the UV rays.

This also features the 4-point suspension, and the dial knob at the back lets you adjust the fit of the helmet without any fuss. It also gives you the wire mesh face shield, along with an adjustable face shield adapter in case you want to put in a clear visor instead. You’ll have to buy that clear visor separately, however.

Then there’s also the set of earmuffs, which gives you a 30dB NRR rating. These things also flip to the back, when you don’t need them to cover your ears.

All in all, this thing work, and it’s very affordable to boot. Some do find the assembly somewhat challenging, so you may need to do some online research to get it done right.

Pros
  • Highly visible
  • Comes with wire mesh
  • Adapter lets you set a clear visor easily
  • Very effective noise reduction
  • Earmuffs flip to the back
  • Easy helmet adjustment
Cons
  • Somewhat challenging assembly
  • No ventilation holes

Greenworks Chainsaw Safety Helmet with Earmuffs GWSH0

This thing sits lightly on your head, as it only weighs 1.4 pounds. But it offers ample protection that meets both ANSI and CE safety standards. It’s also highly visible with its bright green color.

You get the requisite hardhat protection, along with the dial knob at the back for quick circumference adjustments. Then there’s the wide mesh face screen, which protects your whole face. This can flip up when you want clearer vision (and when the chainsaw is off). The earmuffs are also removable, and they can be set to the back of the helmet as well.

The main issue is, again, the assembly. There aren’t any instructions at all (at least for us), so thank goodness for Google and YouTube videos.

Pros
  • Meets ANSI safety standards
  • Highly visible
  • Mesh screen and earmuffs flip up (or back)
  • Very lightweight
Cons
  • No instructions for assembly
  • May be too lightweight for some, so it feels flimsy

Reasons You Need a Chainsaw Helmet

In case you think you don’t need a chainsaw helmet, here are some reasons why you need to reconsider:

  • It protects your head. You’ll need the helmet in case someone’s using the chainsaw and tree limbs are falling all around you. You may also fall from a ladder, and the helmet can reduce the impact.
  • You protect your face. Every chainsaw helmet requires a metal mesh screen, to protect against flying debris when you’re using the chainsaw. The metal mesh also lets in air to reach your face, so you don’t feel overly warm.
  • It reduces the noise. A chainsaw can reach up to 106 decibels, which can be dangerous for your eardrums. The earmuffs reduce the noise levels considerably, especially when you use it in conjunction with earbuds.

Conclusion

Using a chainsaw helmet simply makes sense, especially when you’re working outdoors. Even when you’re using the chainsaw indoors, you still need the face and eardrum protection, and the helmet is a great foundation for the mesh screen and earmuffs.

Of course, you may want to use the helmet for other jobs, so you may want to get extra features like a clear visor. A rain neck cover also helps when you work outdoors.

It’s best if you make sure you get a helmet that fits your head perfectly, which is why all our recommended chainsaw helmets come with dial knob adjustments. We also made sure that the mesh screens and the earmuffs all lift up when you don’t need them.

Just make sure you assemble the helmet correctly. Go online and read customer reviews, and watch YouTube videos to get this done right. Even the best chainsaw helmets won’t be much help if you don’t set it up properly!

Best Chainsaw Gloves in 2021 (Reviews & Top Picks)

Best Chainsaw Gloves

Chainsaws can be terrific for a lot of woodcutting projects. But they can be darn dangerous—you don’t really need to watch The Texas Chainsaw Massacre to know that treating this as a toy is not a good idea at all.

Which leads us to the need to wear the best chainsaw gloves. It’s an utterly crucial part of your uniform if you ever use a chainsaw. If there’s a situation to heed the ancient saying that it’s better to be safe than sorry, then this is it.

Best Chainsaw Gloves Comparison Table

Product Picture

Product Name

Size

Protective Materials

Price

Husqvarna 579380210 Functional Saw Protection Gloves, Large

Medium, large, XL

Leather and spandex

Youngstown Glove 05-3080-70-L General Utility Lined with KEVLAR Glove Large, Gray

Small, medium, large, XL, XXL, XXXL

Kevlar

Oregon Chainsaw Gloves - Extra Large, Size 11, Model Number 91305XL

XL

Leather

Elvex CSGLV-LG Prolar Chainsaw Gloves - Large, Orange/Black

L, XL

Prolar

Endura Hi-Viz Cut-Resistant Chainsaw Gloves- 385CS/XL

Medium, large, XL

Kevlar

Vgo 1-Pair Chainsaw Work Gloves Saw Protection on Left Hand Back (Size XL, Orange, GA8912)

Medium, large, XXL

Chainsaw stopper fabric

Echo 99988801601 Chainsaw Kevlar Reinforced Protective Gloves - Large

Large

Kevlar

7 Best Chainsaws Gloves Reviews

Let’s take a closer look at our recommended chainsaw gloves:

Husqvarna 579380210 Functional Saw Protection Gloves, Large

We went with the Large size, though there are also options for Medium and X-Large. The sizing seems to run a bit large, so you may want to stick with the Medium size if your hand size is between Medium and Large.

Here the design is meant mainly for right-handed people, since the left glove is intentionally tougher and more resistant to cuts. After all, if you’re a rightie then your left hand is more vulnerable. It’s more out in the open, while your right-hand is pretty much covered by the chainsaw grip guard.

Still, you have the goatskin leather for your palm to dampen the vibrations. At the back of the hand, you also get the spandex fabric for protection.

You won’t have any trouble seeing your hands while at work, as the 2 color options both offer highly visible colors. Even the H logo at the back of the hand is reflective.

This works for lots of DIY jobs, and not just for rocking it with a chainsaw. If you want extra protection without the discomfort, then this ought to work.

Pros
  • Great for all DIY tasks
  • Comfy
  • Extra protection for left hand
  • Easy to see
Cons
  • Sized a bit large
  • Meant mainly for righties
  • May not offer enough protection for regular chainsaw work

Youngstown Glove 05-3080-70-L General Utility Lined with KEVLAR Glove Large, Gray

This is another “general utility” glove, but this time you have Kevlar all over the gloves. The 360-degree protection makes sure that your hands are really protected.

Of course, the top of the hand (especially the non-dominant hand) may need more protection, and for that you need internal knuckle protection for that area. The palm area has tough non-slip reinforcement, which also covers the thumb and fingers.

However, there’s actually a part of the thumb area that’s made of terry cloth. This is super-convenient, as you can then use it to wipe away sweat that may get into your eyes.

The gloves also offer a convenient and effective Velcro enclosure for the cuff, so you can make sure the splinters can’t get inside.

With the terrific puncture resistance that the gloves offer, this is great for lots of DIY tasks. The pair of gloves is even machine-washable.

Pros
  • Total Kevlar protection
  • Extra protection for top of hand
  • Terry cloth thumb area for wiping sweat
  • Effective Velcro enclosure
  • Easy to wash
Cons
  • May not be all that effective against thorns

Oregon Chainsaw Gloves - Extra Large, Size 11, Model Number 91305XL

With the white and orange color scheme, visibility for your hands won’t really be an issue. In fact, the back is really fluorescent.

What’s more of an issue is that this particular set of gloves only offers the extra chainsaw protection for the left hand. That means it’s not for southpaws—it’s only great if you’re right-handed.

Still, you do get a waterproof kid leather palm area, while the back portion has tough polyester that keeps water out. The palm area is also shaped nicely and fits like, well, a glove. The exposed areas of the gloves are seamless, and have also been reinforced with leather.

The cuffs are knitted as well, so they don’t need adjustment to keep out the splinters.

Pros
  • Highly visible
  • Knitted cuffs work well at keeping out splinters
  • Soft and flexible palm area
  • Very comfy to wear
  • Cut resistant material for the back of the left hand
  • Works nicely against vibration
Cons
  • Not really for left-handed users

Elvex CSGLV-LG Prolar Chainsaw Gloves - Large, Orange/Black

Elvex uses Prolar, which is what they call the unique protective pad they use for these chainsaw gloves. These pads have been tested thoroughly, and through the years Elvex keeps on improving it.

The Prolar pad works by actually jamming the chain against the sprocket and bar in case of an accident. It’s not just a shield (or armor). Instead, having your chainsaw near the pad means the pad works like a spanner in the works.

What’s also notable is that Elvex offers this type of protection even while keeping the weight of the gloves down. It’s also nicely flexible, so you can still work your hands and fingers nicely even while wearing these gloves.

We did get the version for right-handed folks, so you may want another model if you’re left-handed. The critical protective layers concentrate on the most vulnerable area, which is the back of your non-dominant hand.

Pros
  • Special pad that stops the chainsaw from spinning (in case of accident)
  • Lightweight
  • Flexible
Cons
  • Not available in Medium size
  • Not for lefties

Endura Hi-Viz Cut-Resistant Chainsaw Gloves- 385CS/XL

We tried out the extra-large version, though other size options include medium and large. These actually look quite nice (and not so goofy), and the bright yellow at the back of both hands really offer high visibility.

For the palms, you have vibration dampeners thanks to the smooth grain goatskin leather. The leather here is also water-repellent.

If you’re worried about sweating inside the gloves, don’t worry either. The back of the hands also gives you a water-repellent nylon-Lycra fabric for greater breathability. The Velcro wrists also keep the splinters out.

But what about dangerous chainsaw problems? For that, the back of your left hand gets extra protection, in the form of 8 layers of Kevlar lining. This woven Kevlar material has been tested to protect your vulnerable left hand (that is, if you’re a rightie) against a chainsaw that’s running at 3,140 feet per minute. In fact, the material even stops the chain from spinning.

Pros
  • Highly visible yellow
  • Kevlar protection for right hand
  • Vibration-absorbing palm leather
  • Breathable material for the back of the hand
  • Keeps out the splinters
Cons
  • No Kevlar for the right hand
  • May be rather inflexible at first (needs breaking in)

Vgo 1-Pair Chainsaw Work Gloves Saw Protection on Left Hand Back (Size XL, Orange, GA8912)

This is among the most affordable gloves in the industry, but the quality isn’t cheap at all. It’s actually quite comfy to wear, even while you still get proper protection.

Your comfort all starts with the premium goat leather, which offers nice flexibility that works wonderfully with the pre-curved fingers section. The stretch spandex at the back also gives you both breathability and flexibility.

The genuine leather for the palm area is also reinforced by PVC patches, which boost the vibration dampening and the wear resistance. These PVC patches are even textured for a more secure grip. Then you get extra protection for the knuckles on the back.

The back of the left hand also features 12 layers of “stopper” fabric, so that if it ever gets in actual contact with the chainsaw, the fabric stops the chainsaw from working.

Pros
  • Flexible, with pre-curved fingers and genuine leather
  • Breathable spandex at the back of the hand
  • Effective vibration dampening with textured grip
  • Stopper fabric for the back of the left hand
Cons
  • It assumes you’re right-handed

Echo 99988801601 Chainsaw Kevlar Reinforced Protective Gloves – Large

The red and black color scheme is a favorite among many of us. Not just because its’ “cool” or “macho”, but because it’s highly visible, but the dirt on it isn’t highly visible as well. That means it doesn’t look dirty right away.

The front part features the usual goat skin leather, for vibration dampening and for a secure grip. You also get extra foam pads for the palm for extra vibration absorption.

This also features reinforced finger tips and knuckles to protect your fingers. What’s really nice about this is that, this time, both gloves feature the dual layers of Kevlar at the back of the hands to protect the hand from cuts. So, this works for both righties and lefties.

Pros
  • Ambidextrous protection
  • Uses Kevlar
  • Reinforced knuckles and fingertips
  • Goat leather with foam pads for vibration absorption
Cons
  • May not be the best option for non-chainsaw tasks

Top 4 Reasons to Wear Chainsaw Gloves

It doesn’t really matter if you’re just using a chainsaw for a single occasion. That’s enough for you to get serious and get some chainsaw gloves as well.

Here are some situations that may occur when you’re using a chainsaw:

Accidental Breakdowns

This is everyone’s potential nightmare. Something might go wrong with the chainsaw, and that’s not really something you want to imagine with sharp teeth spinning rapidly while you’re nearby.

The chain is particularly problematic, since it can break without any sort of warning. If that happens, you really want your hands to have as much protection as you can get them.

Flying Splinters

One of the main benefits of chainsaw gloves is that they keep out the wood splinters. While they can be rather annoying for your hands, splinters can still cause pain and delays for your work. The best chainsaw gloves make sure that your hands are covered thoroughly, so the splinters can’t get in.

These splinters can actually fly anywhere, which is why experts always preach that you also wear coveralls and safety goggles. It’s all fun and games with a chainsaw, until someone loses an eye.

HAVS

The acronym stands for “hand-arm vibration syndrome” which is a condition you may get with constant use of vibrating tools like chainsaws. The best chainsaw gloves should be able to dampen and absorb the vibration so that you don’t punish your hands too much. With HAVS, you may end up with permanent fingers numbness and muscle weakness.

Friction and Heat

With the spinning components of the chainsaw, you naturally end up with heat due to friction. That’s also due to the contact between the chain and the wood piece you’re working on.

The chainsaw can get too hot, so gloves can protect your hands from potential burns.

Conclusions

It’s true that if you took some time and effort, you can end up buying a reliable chainsaw that’s pretty safe to use. A good chainsaw will be designed in such a way that the spinning blade is kept well away from your fragile hands. You probably have a guard on the grip to protect your hands and fingers as well.

But that doesn’t matter. That old adage hope for the best and expect the worst should always be kept in mind when you’re using a chainsaw, because the “worst” in this case can include losing your fingers. This is not the situation where you assume that Murphy’s Law won’t come into play.

The challenge here is to balance the need for protection with your desire for comfort. Those two factors are inversely proportional, unfortunately.

You may wear steel gloves like a medieval knight, but then you’re unable to flex your fingers properly to use the chainsaw effectively.

Conversely, an extremely comfortable glove may not offer sufficient protection at all.

You can do yourself a favor by starting off with any of the best chainsaw gloves on our list. These gloves offer a fine balance between protection and comfort. Then at least you can work efficiently with your chainsaw, knowing that if worse comes to worst, you still have some protection for your hands and fingers!

Best Chainsaw Chains to Keep Your Project Going

Best Chainsaw Chains

After using your chainsaw for a long while, eventually you will need a new chain for your chainsaw. That doesn’t mean you need to get the exact type of chain that originally came with the chainsaw. Instead, you can get something better. In fact, you may even want to immediately replace the stock chain with a better replacement.

Obviously, a new chainsaw is generally better than the old one. It comes with sharper teeth, after all. But depending on your pick, they may come with additional advantages.

Perhaps your new chain may come with a more aggressive configuration. That makes the chain more effective for cutting hardwoods like maple and oak. Or maybe you get a much safer chain, with a lower potential for kickbacks. 

You may look for additional features that weren’t present in your old chain, such as built-in lubrication that drips small amounts of oil on the chain constantly and evenly. This will keep the chain running more effectively for a longer period of time.

Some chains even come with a self-sharpening feature, which saves you from the tedious task of sharpening the blades yourself every now and then. With this feature, you can just pull a lever while running the chainsaw. This action activates a rasp that applies just enough pressure on the tips of the blades to make them sharper.

There are even chains that are so affordable they’re basically disposable. That is, you can replace them very cheaply, so you may not even care to sharpen the blades to let them last longer.

Best Chainsaw Chains Comparison Table

The most crucial aspect of picking the right chain is that it should fit your chainsaw perfectly. If the chain is too small, then you simply won’t be able to put them on the chainsaw.

But you can’t put in a chain that’s too big, either. A chain that’s too big won’t cut effectively. More importantly, it may sit too loose on the chainsaw and fly off, which can cause injuries to anyone around.

To get the right fit, you must make sure you get the right pitch, gauge, and number of drive links. Here’s a quick look at the Top 10 chainsaws so you can quickly find which ones can fit your chainsaw.

Product Picture

Product Name

Pitch

Chain Length

Price

Oregon S56 AdvanceCut Chainsaw Chain for 16-Inch Bar

3/8-inch, low profile

16 inches

Oregon S52 AdvanceCut Chainsaw Chain for 14-Inch Bars

3/8-inch, low profile 3/8

14 inches

Trilink Saw Chain CL15062X2TL2 18" Twin Pack S62

3/8-inch, low profile 3/8

18 inches

Oregon R34 AdvanceCut 8-Inch Micro Lite Chainsaw Chain Fits Poulan, Remington

3/8-inch, low profile 3/8

8 inches

Oregon D72 AdvanceCut Chainsaw Chain for 20-Inch Bar

3/8-inch

20 inches

Husqvarna chainsaw chain 18-Inch .050-gauge .325 pitch low kickback low-vibration

.325-inch

18 inches

Husqvarna 531300624 H4684 Chainsaw Chain

3/8-inch

24 inches

STIHL 26RM3-74 Oilomatic Rapid Micro 3 Saw Chain, 18" 3689 005 0074 - 2 Pack

.325-inch

18 inches

8TEN Chainsaw Chain for Stihl

.325-inch

18 inches

SUNGATOR 18-Inch Chainsaw Chain SG-S62

3/8-inch, low profile 3/8

18 inches

Top 10 Chainsaw Chains Reviews

We went for a wide variety of sizes, so that you can probably find one of the Top 10 chainsaw chains on our list that will fit your chainsaw. Here’s a closer look at each of them, telling you why you may want to get these for your chainsaw.

Oregon S56 AdvanceCut Chainsaw Chain for 16-Inch Bar

The packaging is quite nice here, especially at the back. There you’ll find a list of chainsaw models that can accommodate this chain. If you find your model here, you’re good to go.

This semi-chisel chain has been designed and manufactured to meet the ANSI and UL low-kickback requirements for your safety. It uses a special cutter design that offers fast, smooth cutting while minimizing the kickback.

This also features the LubriTec feature, which applies oil on the chain efficiently. It’s also designed to work better despite dirt and dust.

This won’t require frequent sharpening, as the blades stay sharp longer. The blades have this outer layer of industrial chrome so the surface is more durable. The hardened rivets also give you a tougher load-bearing surface that boosts the strength, reduces the wear, and reduces the need for frequent tension adjustments.

The chain doesn’t even vibrate as much as the other chains, as the design also keeps some of the vibration from reaching the user. This reduces the vibrations by as much as 25%.

Pros
  • Meets safety standards
  • Oils the chain efficiently
  • Blades stay sharper longer
  • Reduces vibrations
  • Lasts a long while
Cons
  • Won’t last long with daily use on hardwoods

Oregon S52 AdvanceCut Chainsaw Chain for 14-Inch Bars, Fits Craftsman, Echo, Homelite, Poulan, 52 Drive Links

This offers the same set of advantages that you also get with the S56. It’s just that this time, it features a different length. If you have a 14-inch bar on your chainsaw, then this is what you get.

Once again, you have a semi-chisel chain here, which balances low kickbacks with great cutting performance. This meets the ANSI and UL requirements for low kickbacks.

The blades remain sharp, thanks to the layer of industrial chrome on the outside. It comes with automatic oiling for better performance and wear resistance, and it also lasts longer due to the hardened rivets. These rivets lead to less frequent tension adjustments. Using this chain leads to reduced vibrations, which minimizes user fatigue along with the chainsaw wear and tear.

There’s really nothing wrong with these chains, which is why they’re so popular. Unfortunately, scammers know this too. You better make sure you know who you’re buying from when you get the Oregon S52, as you may get something else upon delivery.

Pros
  • Meets low kickback industry standards
  • Blades remain sharp for longer
  • Efficient automatic oiling
  • Reduced vibrations
  • Hardened rivets for greater strength
Cons
  • Chances of scammer sellers

Trilink Saw Chain CL15062X2TL2 18" Twin Pack S62

When you want a more efficient cutting chain for more challenging projects, then you may want to take a look at this Trilink chain. This cuts very quickly with its rather aggressive design, which does have its pros and cons. It cuts quickly even when you’re dealing with hardwoods, but it may not be the best option for trimming if you want smoother cuts. You should also know what you’re doing—this isn’t all that great with chainsaw newbies.

For its efficient cutting capabilities, it is actually quite affordable. For that aggressive cutting capability alone, lots of people think the price is a bargain. The semi-chisel design also offers terrific wood chip clearance. This is UL-certified to meet ANSI standards for low kickback safety.

This even comes with the Centri-Lube oil-ways on the drive links. These oil-ways allow the oil to spread more efficiently all through the drive links and rivets. This really reduces the friction, which leads to better wear and tear resistance. In addition, it also minimizes the chain stretch so that you don’t have to do tension adjustments too frequently.

The chain is also rust-resistant, so don’t worry when you work in more humid conditions.

Pros
  • UL-certified to meet low kickback requirements
  • Very effective cutting design
  • Oilways for better oil lubrication
  • Rust-resistant chain
Cons
  • This may not be the best option for newbies
  • It may be too aggressive for smaller jobs

Oregon R34 AdvanceCut 8-Inch Micro Lite Chainsaw Chain Fits Poulan, Remington

This small 8-inch chain is designed for pole saws, mainly those made by Remington and Poulan. Despite the small size, this is still an AdvanceCut model, which means it offers terrific performance with dependable durability. It’s made right here in the US, in an ISO-certified facility. It’s also UL-certified for low kickback.

As an AdvanceCut chain, you get the Lubritec oiling system for efficient lubrication, ensuring consistent performance and better resistance to wear and tear. The design minimizes the vibrations by 25%, again helping the chain (and the user) last longer.

The blades stay sharp for a longer time, due to the chrome plating on the cutter for better wear resistance. The hardened rivets on the chain also minimizes the wear and chain stretch, so you’ll need to do fewer adjustments.

This is quite affordable, which is surprising given the quality of the chain. If there’s anything wrong with this, it’s the fact that it won’t fit all the small chainsaws and pole saws out there. A lot of the complaints aren’t about the chain’s performance. It’s about how it won’t fit models like the Harbor Freight 62896 pole saw or the Homelite 8-inch.

Pros
  • Very affordable
  • Chrome plating on the blades (the blades remain sharp for longer)
  • Minimal wear and chain stretch
  • Minimizes vibrations
  • UL-certified for low kickback
Cons
  • Picky when it comes to the chainsaw it fits

Oregon D72 AdvanceCut Chainsaw Chain for 20-Inch Bar

Okay, by now you probably realize that we really like the AdvanceCut chains from Oregon. Check at the back of this package to see if your chainsaw model is listed here. If it is, then go ahead and just get this chain, pronto. Or you can just make sure your chainsaw accommodates a 20-inch chain with 72 links, along with a ⅜-inch pitch and a 0.050-inch gauge.

Don’t worry too much about kickbacks with this chain, since it meets the UL and ANSI requirements for low kickbacks. Yet you also get a smooth-cutting semi-chisel design that works well enough even with dirt and dust issues.

The blades stay sharp because of the chrome plating on the blades, while the hardened rivets boost the strength of the chain so you need less frequent tension adjustments. This even gives you automatic oiling, so your chain moves more smoothly while it also lasts longer.

This even minimizes the vibrations by 25%, which is great for user fatigue and wear and tear for the machine.

There have been complaints, though, regarding the quality control on some products. It seems that some people received chains with 1 or 2 extra links, so that the chain didn’t fit properly.

Pros
  • UL-certified for low kickbacks
  • Blades stay sharp for a longer time
  • Less frequent tension adjustments
  • Better resistance to wear and tear
  • Reduced vibrations
Cons
  • Semi-chisel design isn’t meant for constant use on hardwoods
  • Quality control issues regarding the number of links

Husqvarna chainsaw chain 18-Inch .050-gauge .325 pitch low kickback low-vibration

When you’re an arborist who’s using a smaller lightweight chainsaw, you don’t need a monstrously aggressive cutter. You’re better off with this one instead.

This is a very safe chain to use in these instances, due to the fact that it minimizes the kickback. It also reduces the vibrations, leading to better control over your lightweight chainsaw. You’re better able to make accurate cuts, while you don’t suffer user fatigue too quickly due to the vibrations. The reduced vibrations also lead to a longer lifespan for the chainsaw itself.

This is not a heavy-duty chain that offers very fast cutting. Those faster chains tend to make them less safe for regular folks due to the higher potential for kickbacks. But this works nicely, when you’re cutting green or dry wood, or rotting wood.

Are you a chainsaw user who cuts about 4 to 5 cords of firewood per year? If that’s the case, then this is what you want and need. You won’t have any problems with this, and it’s easy enough to sharpen.

Pros
  • Low kickbacks
  • Minimal vibrations
  • Works for arborists and occasional users
Cons
  • Doesn’t cut quickly

Husqvarna 531300624 H4684 Chainsaw Chain

With 84 links, this is meant for a larger chainsaw, obviously. In fact, lots of people consider this the ideal chain for heavy-duty work. When you do a lot of cutting (especially hardwoods), then you really ought to consider this chain.

This features the square-corner “chisel” cutters that give you the terrific performance you don’t normally get with other chains. This will cut really fast, and smoothly too. If you have the powerful chainsaw in your tool shed, this is the perfect match.

However, this model has now been discontinued. Not because it doesn’t work right, since it works great. It’s just that it only works with certain Husqvarna chainsaws. The new replacement works with more Husqvarna chainsaw models.

There’s no word if there’s going to be a chain model with the same level of performance that can fit in non-Husqvarna chainsaw models. That means if you want to use this chain, you’re going to have to switch to a Husqvarna chainsaw.

Pros
  • Great for heavy duty
  • Matches perfectly with powerful chainsaws
  • Cuts fast and smoothly
Cons
  • Only works with Husqvarna chainsaws

STIHL 26RM3-74 Oilomatic Rapid Micro 3 Saw Chain, 18" 3689 005 0074 - 2 Pack

This isn’t exactly dirt cheap, but you may want to get a 2-pack nonetheless. That’s because it’s so good. In fact, the vast majority of people who have tried this only have good things to say about it.

This chain features small, rounded cutters, and it’s meant to give you the smooth and accurate cuts you want. The micro-chisel design here is great when you’re using the chainsaw for trimming a tree. When you do a smooth cut on the tree, it’s less likely to get a disease due to the cut.

This works very well for softwoods. It works even for hardwoods, though you may need a longer time to cut through. This is extremely safe to use, and it meets the ANSI standards for low kickback requirements.

You’ll also like the Oilomatic lubrication on this chain, as the drive links all have the channels that let the oil spread evenly though the length of the chain. In fact, next to these channels there are small pockets that fill up with oil. These pockets then release the oil slowly, using the centrifugal force generated by the spinning chain.

Pros
  • Offers really smooth cuts, as it cuts like it’s cutting through butter
  • Meets low kickback standards
  • Fantastic lubrication system
Cons
  • Takes a longer time to cut through hardwood

8TEN Chainsaw Chain for Stihl

Are you an experienced chainsaw cutter who needs a chain for big jobs involving lots of hardwoods? If that’s the case, then you may want to go with this full-chisel chain. This is not a Stihl chain, if that isn’t clear. It’s an 8TEN chain, but it’s designed for Stihl chainsaws.

Take note that this isn’t ideal for newbies. There’s simply a high risk of kickback if you don’t know what you’re doing.

This is a super tough chain, and the blades really do the job. Even with lots of hardwoods, the blades stay sharp for a longer time. The squared edges make for quick work. What makes this special is that this chain also works with softwoods. A lot of full-chisel designs aren’t good for those things.

Pros
  • Offers fast work
  • Works for hardwoods and softwoods
  • Great for pros
  • Blades stay sharp
Cons
  • High chance of kickback

SUNGATOR 18-Inch Chainsaw Chain SG-S62, 3/8" LP Pitch - .050" Gauge - 62 Drive Links, Compatible with Craftsman, Ryobi, Homelite, Poulan and More

This semi-chisel is extremely affordable, but that doesn’t mean you’re getting low quality. At the very least, this is UL-approved as it meets ANSI standards for low kickback. The semi-chisel design also stays sharp for a longer time than usual, and it’s not too sensitive to dust and dirt.

In fact, this chain seems to prioritize durability. This starts with the steel that’s imported from Germany. This steel is extremely tough and comes with terrific anti-fracture qualities.

The cutters have all been plated with premium chrome, with industrial-grade hardness. This means the cutter really lasts, with better resistance to wear. Even the rivets here have undergone a special heat treatment so you get a better and tougher connection between the links of the chain.

Pros
  • Very affordable
  • Meets low kickback standards
  • Extremely durable with long service life
Cons
  • No special lubrication system

Blade Configurations (Chisel Angles)

The chisel angle configuration determines the cutting effectiveness of the chain. Keep in mind that having a more aggressive cutting design may increase the chances of kickback.

Full Chisel

This configuration will give you terrific cutting speeds, with sharper blade tips and a really aggressive design. Pair this with a powerful chainsaw, and you get a tool that can easily deal with maple, oak, and other hardwoods.

On the other hand, you get a higher chance of kickback. This is when the chain somehow becomes pinched, or when the spinning blade tips touches the wood wrong. It results in a violent backward jerk of the chainsaw, which is obviously dangerous.

Semi-Chisel

This offers a slower cutting speed than the full chisel. But it’s less aggressive leading to a lower chance of kickback. It works nicely for both hardwoods and softwoods. It also works better in “dirty” conditions, like when cutting logs on the ground. These chains also don’t dull as quickly as the full chisel version.

Micro Chisel

This is what you get when you want very smooth and accurate cuts. These often meet ANSI standards for low kickback. It’s just that it cuts slower than even the semi-chisel configuration.

Low Profile

This is a special design, using either semi-chisel or micro-chisel cutters. It’s just that you have a lower cutter height here. This lower profile is meant to really reduce the chances of kickback.

The drawbacks include a slower cutting time, and the blades tend to dull more quickly.

Tips on Maintaining Your Chain

It’s best if you don’t buy chains too frequently, and that means you better take care of the current chain you have.

  • Either go with a self-lubricating chainsaw, or you don’t forget to manually oil the chain. The oil reduces the friction for smoother performance and longer durability
  • Always keep the chain sharpened.
  • Are you storing the chainsaw away for a few months? If that’s the case, take out the chain from the chainsaw. Clean the chain, and then spray it with protective anti-corrosion oil. Then you can store this separately or put it back on the chainsaw for storage.

How to Change the Chain on Your Chainsaw

Some chainsaws may have special ways of removing the chain from it, so always consult your manual. Still, the normal procedure is similar to these steps:

  • Start by taking out the side panel that covers the chain bar. You normally have 2 nuts securing this side panel.
  • Move the chain bar to the outside to release the chain tension. The chain will then sag away from the bar.
  • With the chain now loose, work the chain off the bar. Wear gloves and use your fingers.
  • Set the replacement chain on the bar and around the sprocket at the back. Check that the pointed drive links fit nicely into the groove on the chainsaw bar.
  • Engage the tension pin by pulling the bar to its forward position. This will tighten the chain on the chainsaw.
  • Put back the side panel, and you’re done.

FAQs

Q: How do you know that the chain will fit into your chainsaw?

You have to check these 4 specifications: pitch, gauge, number of chain links, and chain length. All of these things must be right.

Q: How frequently should you sharpen the chain?

Normally, you just check out what’s going out of the chainsaw. When you get dust instead of wood chips, that means the chain is dull enough to need sharpening.

It all depends on the chain you get, and the thickness and the hardness of the logs you’re cutting. This can happen after several hundred cuts, or even after only just a hundred cuts.

Q: How long will the chain last, before you need to replace it?

That depends on the quality of the chain your using, the toughness of the logs you normally cut, and how often you use the chainsaw. Most casual homeowners who only prune trees a few times each year may not have to replace the chain for up to ten years.

On the other hand, if you’re a pro who uses a chainsaw daily, the chain may only last for 6 months before it needs a new one. That’s especially true especially when you work with lots of hardwoods.

Conclusion

The best chainsaw isn’t really worth a damn when you’re using a subpar chain on it. First make sure that the chain actually fits your chainsaw, then make sure its design fits your normal woodcutting jobs.

With the right chain, you either work more efficiently or you can work a lot safer with lower chance of kickbacks. You can also make sure you get smoother and more accurate cuts, which lessens the chance of disease when you’re pruning your trees.

With the best chainsaw chains, you optimize your chainsaw while you make sure you remain safe!

3 Different Types Of Miter Saws: Expertly Explained (2021)

DIFFERENT TYPES OF MITER SAWS

Miter saws are one of the most common tools nowadays in the woodworker’s arsenal. Not only are there different types of miter saws, but their versatility allows the user to take care of multiple types of jobs, and this makes them one of the most desirable power tools out there. We’re here to help you look through these different types and make sure you know all there is to miter saws, before you make your ultimate choice. So, let’s get into it!

Types of Miter Saws

When it comes to miter saws, it’s not very hard to get up to date on everything about them. First, let’s take a look at the types of miter saws you can find.

Standard Miter Saw

Standard Miter Saw

A standard miter saw is one that takes care of the most obvious type of cut possible with a miter saw; the miter cut. These types of miter saws come with a miter gauge, and this allows for you to set up specific miter angles for your blade, making sure you can get the perfect cut possible.

While the standard miter saw is a great tool, you’ll find that they are very limiting when it comes to the grand scheme of miter saws. Apart from the miter cut, you’ll be able to make the basic rip cut and cross cut with the help of the saw and blade. The standard miter saw does however come with all the perks that would be available in other miter saws as well. You won’t lose out on any of the accuracy and precision when it comes to cuts, when compared to other types of miter saws.

Compound Miter Saw

Compound Miter Saw

A compound miter saw is far more versatile if compared to a standard miter saw. These compound miter saws come with the miter gauge as usual, but also include the bevel gauge. The bevel gauge allows for the inclusion of the bevel cut, and this involves tilting the blade of the miter saw, in order to get the desired cut with your saw.

The compound saw with the help of the bevel gauge also allows you to make compound cuts. The compound cuts are a mix of both the miter cuts and bevel cuts together. You use the miter gauge to angle the saw itself, and the bevel gauge tilts the blade to your desired angle. This allows for a very useful angled cut that comes in handy in various types of woodworking. One very common application for compound miter saws are in crown molding. Crown molding is a very intricate form of work that can be achieved with a compound miter saw, and you’d do well for yourself by learning how to cut crown molding.

Compound miter saws don’t end there however. They can be broken down into two further sub-categories, based on how versatile the user wants their machine to be. The two are:

  • Single Bevel Compound Miter saw:

    A single bevel compound miter saw includes one bevel gauge on the saw. What this does is, it allows for your miter saw’s blade to be tilted to one side (either right or left). The other side however, will have a very limited angled cut potential. While it may seem like that’s a big problem, it really is not. At most, for certain cuts, you’ll just have to flip the piece of wood you’re working on, on to its other side, to make sure you get it done right.

  • Dual Bevel/Double Bevel Compound Miter Saw:

    The dual bevel compound miter saw, as you’ll have probably guessed, has two different bevel gauges on the saw itself. This allows for the blade of these miter saws to be tilted to either side. This not only makes your work more comfortable, but it also allows for you to highly optimize your work, when compared to the single bevel compound miter saw. It can save you a lot of time, not having to flip your piece around constantly.

Sliding Compound Miter Saw

The last type of miter saw is the sliding compound miter saw, and this type of miter saw is both more versatile and less versatile than the compound miter saw, all at the same time. How so?

Well, the sliding aspect of this miter saw allows for it to have a much deeper cut length and also a much longer cut length. This is extremely helpful for people who work with longer pieces on a regular basis. It is basically a compound miter saw with all the perks and features, but with the added rails in order to help it make cuts on larger pieces, with ease.

The sliding compound miter saw lacks behind the regular compound miter saw in terms of its cuts. Whether you’re talking about miter cuts, bevel cuts or compound cuts, the sliding miter saw lacks the accuracy and precision that both the standard miter saw and compound miter saw have. This is because of the addition of the extra rails on these miter saws. While they help the blade slide on the saw itself to make longer cuts, it limits the saw’s ability to make larger angles when cutting. This makes woodworkers compromise whether or not they want to have a sliding compound miter saw or just a compound miter saw. This mainly depends on whether they prioritize accuracy and precision over the length and depth of cuts.

Types of Cuts

Even though we have mentioned the types of cuts that a miter saw can deliver, we’ll leave a small diagram below to help keep a reference point of all these cuts. Even though it’s only four cuts, their combinations can help woodworkers accomplish numerous woodworking tasks!

Types of Cuts

What Is The Best Choice?

There really isn’t a best choice of miter saw between these three types. When it comes to choosing the right saw, you’ll need to consider what you think is the best for you. Maybe your job requires cutting large pieces of wood, and a sliding miter is the best option for you. If you’re required to do very intricate work, then the compound miter saw (single or dual) might be the most handy one. If you’re very new to woodworking and want to get a very basic idea of using these saws, then the standard miter saw might be the right choice. However, it mainly depends on how you will be using the tool!

Factors, Perks and Features to Keep in Mind

These saws can be found in abundance in the current market, but that only means you need more knowledge of the right perks and features for yourself, to help you know the best choice out there. What are these?

  • The size of the saw you want is very important. Miter saws are very common in 10 and 12 inches. These will help you take care of most jobs that are required of professionals or DIYers. However, if you require something larger, then you can always opt for a sliding compound version as well.

  • The type of blade you use for your saw can also determine how efficient your work is. Just because you have the best sliding compound saw, doesn’t mean your work will be top notch if the blade isn’t up to the mark as well. Thus, it’s always good to make sure you have the right accessories to go with the tool as well.

  • Speaking of accessories, these saws often come with a few different tools in order to help you get your work done faster. It’s always good to make sure you’re buying a product that includes everything you’ll need or won’t (doesn’t hurt to have them).

  • The availability of ergonomic features in any woodworking tool is a key factor. These small additions on a tool can make them much more efficient and also comfortable to work with. So, it’s good to keep an eye out on them.

  • Safety features are also a very big factor when it comes to choosing your perfect tool. They not only keep you safe, but also ensure that your tool doesn’t come to any harm, both in and out of use.

  • Even though you got a sliding miter or compound version of the saw, you’ll want to make sure that the saw is optimized. Keep an eye out for how many positive stops the saw has. These are basically designed into the tool, to help the gauges stop at the most popular angles used by woodworkers. Not only will they help you save time when working, but they’ll also increase your accuracy in measurements as well.

  • Laser guides are also a very nifty feature to have on your saw. These guides help you in placing your blade perfectly on the mark you need when you’re making your cuts. Thus, they can increase your efficiency and accuracy with ease.

  • If you’re someone who works in different areas or needs to move around quite a bit, you can always opt for cordless miters as well. They run on battery power, and are easily portable. However, in general they have less power than the traditional saws, so if you need the power, it’s best to stick to the traditional ones. 

These are some pointers to help you out in picking the best miter saw out there for yourself. And if you’re someone who is new to using them, it’s always best to learn how to use a miter saw.

The Takeaway

Hopefully you’ve learned fully about all the different types of miter saws out there, and we hope you’ll be able to make the perfect decision for yourself now! They’ve become such a regular tool nowadays, that you have to think of them as an investment, and make sure you choose a saw that fits your needs the best. And it’s always good to keep in mind that buying from a reputed brand will allow you to almost always come away with a very high quality product.

6 Different Types of Chainsaws: A Complete Buyers Guide (2021)

different types of chainsaws

Trying to find the best chainsaw for yourself can be quite a task in the current market. There are tons of choices out there now, and if you’re not sure about the specifics of chainsaws, you might have an even harder task at hand! With this article, we’re going to be delving into all the different types of chainsaws, and helping you make the best choice possible to ensure you get your work done with ease.

6 Different Types of Chainsaws

There are mainly 6 different types of chainsaws, and each of them have their own perks for being used for specific tasks. Some are more beneficial for people taking on large tasks, while others are better at being maneuvered for smaller tasks. Find out which is perfect for you!

Pneumatic Chainsaw

Pneumatic Chainsaw

For the first choice, we’ve chosen the most powerful type of chainsaw out there. Pneumatic chainsaws are the best chainsaws for large industrial jobs. However, they are quite rare and you’ll most likely need to speak directly to the manufacturer in order to acquire one of these. What separates these even more from gas powered chainsaws, is the fact that they don’t release any fumes when being used. They often come with their coolant system within the mechanism, making them very easy to work with. They use air pockets which are very highly pressurized and this allows them to cut through concrete and even metal, with ease. While they are the most powerful type of chainsaws out there, they are mostly used for industrial purposes. 

Gas Chainsaw

Gas Chainsaw

Gas chainsaws are the most powerful chainsaws out there that can be used for landscaping, and this makes them very popular among both professionals and occasional users. They can be found in various sizes which makes them quite versatile for people who want to take on various types of work. What’s great about gas powered chainsaws is that they often have the capability of having their guide bar to be changed. This allows for one person to use the same gas powered chainsaw for different types of work, without having to change the whole system.

Gas powered chainsaws use a gas mixture that acts as fuel to help power the machine. While they may triumph over other chainsaws in terms of power, gas powered chainsaws release a lot of fumes when in use, because of this fuel system. A gas chainsaw also brings about the issue of having to lug around the fuel at all times when you’re working, because you’ll have to ensure your chainsaw doesn’t run out of its fuel, otherwise it’ll power down.

Gas powered chainsaws have a simple process of being powered on, but it can be quite taxing after a while. You’ll need to pull on the starting cord after priming the machine first. Maintenance used to be a long process for gas powered chainsaws, but with new features, you can usually find chainsaws with great perks nowadays to help with these. Overall, if you have large tasks at hand, a gas chainsaw is pretty much the best choice for yourself, whether you’re a professional or a DIYer.

Corded Electric Chainsaw

Corded Electric Chainsaw

Corded electric chainsaws are the most powerful type of electric chainsaw, and they have quite a few benefits when compared to gas chainsaws. A gas powered chainsaw runs on the fuel you provide it, but a corded electric chainsaw will have no issue with power, since you’ll plug it into a power outlet. Unfortunately, you will be restricted to receiving power for the chainsaw, depending on how far the cord allows you to go. You can definitely increase your radius for work with the help of an extension cord.

While corded electric chainsaws are great in terms of power, they are usually best for medium sized tasks, as they aren’t as heavy duty as gas powered chainsaws. However, electric chainsaws in general have the ability of being fitted with multiple features that not only make them more optimized, but they’ll also help you feel less fatigued when working for prolonged periods of time. As long as you can work within your work space, a corded chainsaw will always seem like an easy choice for you, and if you have an extension cord, there’s definitely no problem!

Cordless Electric Chainsaw

Cordless Electric Chainsaw

Cordless electric chainsaws are the more portable version when it comes to electric chainsaws. From the name, they differ from corded electric chainsaws in the sense of not needing any cords to help power them. They rely on batteries to help power them instead. Thus, they can also be known as battery powered chainsaws.

When it comes to small or medium tasks, battery powered chainsaws are the most feasible options for people. If you need to cut wood or trim some branches at home, a cordless electric chainsaw is very easy to maneuver. They usually come in small sizes as well, mainly because of their capabilities in terms of the work they are meant for. 

Pole Chainsaw

Pole Chainsaw

While technically not a chainsaw, pole saws are basically chainsaws stuck to a stick. Why though? They basically allow people to maneuver their chainsaws better and make cuts on wood that would be harder to reach otherwise. What’s great is that they can use all types of chainsaws, and power them properly.

Pole saws usually tend to be shorter in general. This is to ensure the stick itself doesn’t break when being used. While they may seem to be a weird method for a chainsaw, pole saws tend to be a great way to ensure people can take care of their intricate tasks with ease. They also have much less power than any other type of chainsaw, which means you can’t really use them for any work other than small tasks.

Manual or Pocket Chainsaw

Manual or Pocket Chainsaw

If you thought pole saws were unorthodox, an even more unique chainsaw is the manual or pocket chainsaw. These types of chainsaws aren’t really the normal chainsaw, rather they are just a chainsaw chain, with two holding points on either side. You can carry them around in your pocket as they are very small. They aren’t really good for cutting much other than for making small campfires.

Choosing Your Chainsaw

You may have found out about new chainsaw types, but it is also very important to know all the factors that should come into your mind, when you’re making your choice on the final one. Let’s find out what they are!

Chainsaw Size

Choosing the right chainsaw size is key when it comes to making sure you can work in peace, and that your work is optimized. The chainsaw size refers to the size of the guide bar of the chainsaw, on which the chain rests. How do you know which size is the correct one for you?

Well, chainsaw size really depends on the size of wood pieces that you’re usually cutting. If you’re regularly making cuts on a 12 inch piece of wood, you’ll need to ensure you have a chainsaw which is 12 or 14 inches in length. It is always a good idea to make sure you have a chainsaw which is 2 inches longer than the pieces you’re cutting.

Even if your chainsaw isn’t longer than the width of the piece you’re cutting, it won’t be much of a problem for you. The one thing you have to look out for, is that you’ll need to be careful, otherwise you can suffer from kickback which is really dangerous.

Sharpening Your Chainsaw

Making sure your chainsaw chain is sharp, is a very important thing when it comes to working. If your chainsaw chain isn’t in good condition, you’ll find that the cut isn’t as clean as it should be. You can tell a chain needs to be sharpened by seeing the by-product of your cuts. Usually, a chainsaw will spew out sawdust once a cut has been made, but if the chain isn’t sharp, you will see wood chips forming instead. Thus, it’s best to know how to sharpen a chainsaw chain, as you’ll keep your work quality at a top notch level.

Ergonomic Features

With the modernizing of these power tools, you’ll find that chainsaws nowadays have various features which make them much easier to work with. Not to mention, you’ll find yourself producing better quality work with their help. Good types of chainsaws made by reputed brands will include various types of perks. Some have an automated oiling system, which makes sure the chain is always lubricated when you are working. This will not only ensure your work is optimized, but also increases the lifespan of your chainsaw due to proper usage. More ergonomic features can also include cushioning one or two parts of the chainsaw, and this will help you not become fatigued during long periods of work. Thus, it is always best to make sure you pick one with the best or most ergonomic features, when looking through chainsaws.

Safety Features

Chainsaws are quite loud and can be a very dangerous power tool when not used properly. However, despite that, they even come with safety features in order to help you make sure you don’t get harmed while working. They mostly deal with mechanisms that are set in place on the chainsaw, in order to help prevent kickback. Kickback occurs when the tip of your chainsaw comes into contact with anything, as this forces your chainsaw back, and can cause a bad situation. However, with this being a common problem for this power tool, you should make sure the chainsaws you are looking at, come with the ability of preventing these situations. For every type of problem, there is a simple solution.

The Takeaway

We hope you were able to learn and understand about the different types of chainsaws out there on the market. While each type has different features and benefits, you’ll need to find out the perfect type for the work you will engage in. Just because a gas chainsaw type is the most powerful for regular use, doesn’t mean it’s the one you need. If you’re in need of taking care of small tasks, pole saws or electrical saws might be the type of chainsaw for you. Thus, make sure you do proper research on everything about chainsaws, before you make your final decision for this power tool!

Different Types Of Table Saws: Expert Reviews (2021)

different types of table saws

With the huge variety of woodworking tools at your disposal, it may become hard to find the perfect one for yourself. However, if you’re on the prowl for a table saw that fits your needs, you’ll first want to learn about the different types of table saws out there on the market nowadays! We’ll go through a list of these different types, as each of them come with their own perks and can benefit you in different ways.

8 Different Types of Table Saws

Table saws can perform many different types of cuts on different types of materials, thus, you need to find the best one for you depending on the type of work you do. This will also factor in issues such as portability and weight of the tool as well. Let’s look into each and every one. 

Benchtop Table Saw

Benchtop Table Saw

A benchtop table saw is one of the cheaper and portable machines out on the market. This machine can easily be carried by the user to different job sites, and can be placed on both a table or the ground for easy and fast work. It comes with a motor below the table surface, and the blade comes through the center of the surface. This table saw can easily cut through softwood (such as a particle board) and even take care of harder wood as well. Definitely a great power tool to possess for the woodworkers who move around doing small tasks.

Jobsite Table Saw

Jobsite table saws differ from the benchtop table saw in size as they are a bit larger and come with a stand. However, these are much more accepted nowadays by woodworkers as they allow you to take care of your tasks with a lot more ease. Not to mention, these are still quite portable and carried to and from different work sites. What’s also great is that the stand allows for you to always have the table saw at the perfect height to work on. High quality and heavy duty jobsite table saws come with the capability of having their height be adjustable. This makes it easy for every woodworker to optimize their work at all times. 

Contractor Table Saw

Contractor Table Saw

The contractor table saw is a heavy duty table saw that does very well in making quick work of most tasks. It is a much heavier and larger table saw than the ones we have already mentioned. It comes with a cast iron base, making it a lot better suited for larger tasks. Not to mention, contractor saws are also very accurate machines which allows them to easily take care of various types of cuts with ease. With great surface area, you’ll be able to cut larger pieces and of different materials as well. Contractor saws also come with great safety features, and also a very efficient air circulation system. This allows for you to ensure your table saw will have a much longer life span with the help of the machine clearing out sawdust with ease. 

You’ll also find that despite being very large power tools, contractor saws are quite easy to move around your work site, with the help of the wheels on the bottom of the stands they come with. While they aren’t the most portable when it comes to table saws, a power tool with such a heavy base being moved so easily is definitely a great perk.

Cabinet Table Saw

Cabinet Table Saw

Cabinet table saws are the next type of table saw we’ll be looking at. Cabinet table saws are also very large in size, and come with a heavy cast iron base and a steel table surface. From the name, you can assume that cabinet saws are often used for building a cabinet. With the intricate detailing required when it comes to making a cabinet, it is impressive that a power tool of this size can easily handle such fine cutting needs. While cabinet saws are very useful to have, you’ll want to ensure you have some sort of experience with table saws before you acquire one. However, they can ensure a lot of power whenever you work, so most cabinet saws will allow you to cut through both softwood and any hard type of wood as well.

Hybrid Table Saw

Now that you’re familiar with the contractor table saw and cabinet table saw, you’ll find the perfect combination of both the contractor and cabinet saws, with the introduction of the hybrid table saw. These are a very popular tool on the market, as they function great as a table saw, by providing you with clean and precise cuts, but they also have the benefit of utilizing the perks of both a cabinet and contractor table saw.

What’s even better with hybrid table saws is the availability of an even more refined dust collection system which allows for the device itself to have a larger life span, with a cleaner working environment. You’ll also enjoy its ability to be very sturdy due to its heavy duty build. However, it won’t be the best when compared to other portable saws, as they are more to be placed on work sites. Looking for the best hybrid table saw can be a tough job, but there are tons on the market, and with proper research you can find the perfect one for yourself!

Compact Table Saw

Compact Table Saw

Moving on from large table saws like cabinet saws and hybrid table saws, we now have a portable table saw, which is the compact saw. These compact table saws are great for small tasks and large tasks. What’s great is, you can carry them around easily and make sure you can do your tasks swiftly and with ease. Despite being known as portable saws, they are bigger than any other portable table saw on the market. They are very handy for both DIYers and professional carpenters for various types of work. They come with a very sleek design, which allows for them to be used with efficiency, and you’ll also be able to make accurate cuts without any problems.

Sliding Table Saw

Sliding Table Saw

One of the largest types of table saws out there on the market is the sliding table saw. These table saws are designed to take care of large scale jobs that are too large for your cabinet saws or hybrid table saws. With the sliding mechanism, you can ensure that even if your pieces of wood are very large, you can maneuver the mechanism to ensure your table saw remains can make the cut in one go. To help the machine achieve this level of cut with precision, you’ll find that the motor includes multiple layers of induction. While these are great power tools for any woodworker to have, it is mostly necessary for people who take on extremely large tasks, and is not something a DIYer or an occasional user should have.

Mini Table Saw

Mini Table Saw

Have you ever wondered how people make very small replicas of large buildings or animals? Well, you can’t use large machines for that, rather that’s where the mini table saw comes in. Mini table saws are much smaller than any other saws out there, and can be used easily to help guide and maneuver through small pieces of wood. Definitely a very neat contraption for model makers to utilize in creating beautiful pieces. 

Important Table Saw Factors

Choosing a table saw isn’t a very easy task without the proper information. Do you need a heavy duty saw? Or do you need a very specific table saw for a very specific task, like a cabinet saw? Let’s look into some of the important factors that come into play when you’re deciding the type of table saws you need.

Table Saw Power

When it comes to the table saw’s power, you’ll need to make sure that it is good enough for whatever work you’re going to delve into. Are you an occasional user or a DIYer who takes on small tasks around the house? Well, in that case portable table saws should be good enough for you. Not only are they easy to use, they can swiftly take care of small cutting tasks around the house. If you’re more of a serious woodworker or looking to move into professional work, then cabinet saws, contractor saws or hybrid saws should be the way to go for you! They can easily take care of an array of tasks with ease, and allow you to learn the full potential of table saws. 

Table Saw Weight and Portability

Whether or not you’re someone who needs to move about frequently when working becomes a very big factor when it comes to doing woodwork. Portable saws are essential for workers who need to move around different places in order to get their tasks done. However, if you have relatively large tasks and expect to be grounded to one spot, table saws such as cabinet or contractor saws are the way to go for you. 

Table Saw Ergonomic Facilities

While many people don’t look too deep into the ergonomic perks and facilities provided by a woodworking tool, they are very important. The smallest addition of something that provides you comfort and ease when working can go a long way when it comes to the quality of your work. Not to mention, it will also reduce the chances of the user experiencing any fatigue when working. Even the smallest change such as the power button placement for the table saw can allow a lot of comfort to the user.

Table Saw Safety Features

Safety is of paramount importance when it comes to table saws or any woodworking tool. Portable table saws need to be made so that you can carry them around without having to worry about cutting yourself while you do so. Large tools such as cabinet or jobsite table saws need to ensure they come with a smooth mechanism so that you can efficiently raise and drop the blade depending on how your work is going. These can range from a variety of different aspects of the table saw, thus it is important to make sure you have a good quality table saw to begin with.

The Takeaway

We hope you have managed to come away with a good idea on all the different types of table saws, and how they can be used to provide you the best experience when woodworking. Whether you’re looking to acquire a portable one or maybe a cabinet or jobsite table saw, you’ll need to make sure that all the facilities they provide are up to the standard you need them to be. Also, it is best to make sure to spend a little extra to buy products from reputed brands, since they have the best experience in delivering the best products to consumers.

Miter Saw Uses: What Are They Good For? (2021)

miter saw uses

A miter saw is one of the most versatile tools anyone can have in their woodworking arsenal. You’re already interested in them if you’ve found this article, so we’re going to write about all the miter saw uses you could probably need and fulfil using a miter saw. We’re also going to look through the different types of miter saws on the market that you can select from. There’s a few different factors that come into play when making your choice, so choose carefully!

Different Uses For Miter Saw

Different Uses For Miter Saw

When it comes to a miter saw there a few types of cuts you can make. Each of these have their own functions, and can be very useful for making various detailed woodworking sessions.

Crosscut

A crosscut is made against the grain of a wood piece you have, and it can be accomplished with various other tools (such as chop saws, circular saws, table saws). This provides a clean and smooth cut on the wood piece.

What’s great about using a miter saw for these cuts, is the fact that they are generally quite powerful machines. You can set one down for your work, and make sure it is stable enough for you to constantly cut through various pieces with its blade. 

You’ll also notice that with a circular saw, you’re most likely going to have to hold it all together in place for you to get the smooth cut. However, with many miter saws, you’ll find that they have a laser guide, and this comes in very handy when you’re trying to make the perfect cut. You can easily place the blade on your wood piece, and get to work without worry. 

With sliding compound miter saws, you’ll also get the ability to make longer and deeper cuts as well. Miter saws are already available in various sizes (10 and 12 inch being the most common), but with the addition of the sliding miter, you get the ability to increase the depth and length of your cuts.

Miter Cut, Bevel Cut And Compound Cut

Miter Cut, Bevel Cut And Compound Cut